Routing Accessories

A portable template set designed for recessing hinges in wooden doors and frames. It has been designed for ease of use and to minimise setting-up time. Use on-site and in joinery shops to increase productivity. No need for marking-out in the conventional way. Use with soft and... more details...

Part No : HINGE/JIG

Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions: IDiameter: 1/8 inch ODiameter: 1/4 inch... more details...

Part No : B63B

A mortise and tenon jig for use with a router. Fully adjustable templates to suit various size mortise and tenons in timber. The jig is an all metal construction with fully adjustable templates. Allows angled and face angled tenons from -10 degrees to +45 degrees, and also has a... more details...

Part No : MT/JIG

A large rigid router table insert plate for incorporation into user-made router tables. Supplied with two concentric rings and lead-on pin. Router plate is made of thermoset phenolic plastic and the concentric rings are glass-in reinforced polycarbonate. Concentric rings and... more details...

Part No : RTI/PLATE

All in one work top jig for up to 900mm worktops, for use by tradesmen. Will cut left hand and right hand corners, R400mm peninsular joint, 45degree end cut with slight radius, 22.5degree -trade+ corner solution, R100mm radius corner, R40mm radius corner, 35mm kitchen door hole... more details...

Part No : KWJ900

Well proven means of routing out stair housings quickly and accurately. Heavy duty routers over 1600 watts like the Trend T9 are ideal for use with our staircase housing jigs. The templates are constructed from solid laminate. Includes a reversible fence for exact matching of... more details...

Part No : STAIR/B

An accurate and easy to use Craft Range dovetail jig for a variety of elegant dovetail joints. Cuts 1/2 inch wide half blind dovetails or rebated dovetails in one operation. Dimensions: Material thickness 12mm to 30mm. Material width up to 305mm. Please note that prices in the... more details...

Part No : CDJ300

A boxed set of 1/2in. Router Bits with 35 different cutter shapes which enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Tungsten Carbide tips ensure long life and the sturdy aluminium storage case provides a safe... more details...

Part No : FAIRBS35

The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sah mortise and dead locks, with up to 3 inch deep mortises and a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Also... more details...

Part No : LOCK/JIG

A set of seven recommended cutters for use with the routerlathe. Dimensions: Shank Diameter: 8mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT. more details...

Part No : SET/RLX8TC

Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router. Woodcarvings can be made on new or existing doors, frames and drawer fronts. The cutter consists of a 45 degree engraving V groove TCT cutter, housed in an aluminium cone shaped... more details...

Part No : RCCX1/2TC

more details...

Part No : MAK164471-6

Assortment of router bits with T.C.T. heads to suit most applications. Supplied in display case. Contents: •   3 x straight bits - 6, 12 and 16mm dia. •   90° ‘VÕ grooving (or groove) bit •   dovetail bit... more details...

Part No : 72892

Well proven means of routing out stair housings quickly and accurately. Heavy duty routers over 1600 watts like the Trend T9 are ideal for use with our staircase housing jigs. The templates are constructed from solid laminate. Includes a reversible fence for exact matching of... more details...

Part No : STAIR/A

Quick and easy end to end dovetail jointing with router in one operation. For decorative panelling, floorboards, skirting, jointing offcuts and tongue and grooving. Solid aluminium template. Adjustable template offset. Can be taken to the workpiece.for use with a heavy duty... more details...

Part No : JB/JIG

A one piece set for producing a lambs tongue sash bar and scribe. The set is initially used for scribing. By adding the rebate block onto the arbor, the set can then be used for profiling. To be used with router in stationary mode. Maximum material thickness = 46mm. ... more details...

Part No : 20/50X1/2TC

Heavy duty 'T' slot cutter for slat wall. A relief cut is required when used. Dimensions: Angle: 119deg Diameter: 30mm Diameter: 10.5mm Cutting Length: 7mm Cutting Radius: 3mm Shank Diameter: 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may... more details...

Part No : 35/5X1/2TC

Tenon stock available as pack of three. The tenon stock is made of birch. Dimensions: Thickness 1/2 inch Width 300mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List... more details...

Part No : BL/DWL127/3

A new version of the popular COMBI1001 worktop jig. Now with cable tidy insert apertures for inserts 60mmdia, 80mm dia. and 105mm x 55mm rectangle, plus aperture for 35mm circular kitchen door hinges. Adjustable length stop for btween 420mm - 1000mm wide worktops. Cuts 45 degree... more details...

Part No : COMBI1002

Two fluted Solid Carbide insert straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature. When deep cuts are required, more than... more details...

Part No : C005AX8MMTC