Advanced Search | Shop by Brand
Leave a review
Sealey Water Pump Drill PoweredSuitable for use with electric drill with output of 350W or more. Composite housing supplied with two 1/2" quick release couplings. Delivers up to 1000ltr/hr of fluid at 3000rpm. Suitable for water, organic solvents, motor oil, heating oil, insecticides, pesticides, liquid fertilisers and other non-aggressive liquids.Delivery Pressure: 15psi @ 3000rpmSuction Head: 1mtr
Showing 1 to 20 of 30 reviews
Page 1 2 next>>
Dennis weeks | 18 August 2014
As mentioned in a previous review, the drive shaft is a weak point. The pump is quite stiff to turn and the shaft is not big enough to be held in a normal drill. A hexagon shaft would be better. The instructions said to turn it anticlockwise. This did not work for me, the arrows on the body indicate the flow is the wrong way. Eventually got it working, clockwise and flowing in the marked direction but then the shaft was worn and now runs with a lot of vibration. I will need to modify the drive shaft before it is usable again.
Was this review helpful to you? Yes | No
John boyer | 12 February 2014
Looks good. Will be used for aquarium water transfer. Should be just the job. Thank you.
Hans meijer | 31 July 2013
I think it is a good product for the price, however the round shaft makes the connection with a power drill difficult as it tends to slip in the drill chuck, a 6 sided end on the axle would be a major improvement.
Arthuriow | 12 May 2013
Works well but very big warning, if you do not notice pump is running dry it will burn out very quick as i found out. Burnt out two of them.
John griffiths | 28 March 2013
The pump was adequate for the use i had for it.
to drain a pond of the last 3 inches of water left. it took a while to do as i stopped the drill every so often, not to over heat the drill. For small jobs it is value for money.
Mrs w mctiernan | 19 March 2013
Pump is light and convenient to operate with power drill. we have had it running for up to 40 mins moving water between rain barrels. Does just what we wanted.
also specification on line was clear and delivery was quick.
seems a good buy!
Phil | 28 February 2013
The pump is fairly tight, which means the pump body fights hard to turn if hand held.
i managed to snap both hose adapters the first time i tried it. Fortunately, these are standard size, so i was able to replace.
suggest you screw the pump to a piece of wood before use.
Paul | 25 January 2013
Perfect for emptying and refilling a large aquarium, easier than trying to hold a 25 litre container of ro water steady!
David | 04 January 2013
Needed urgent transfer of kerosene
from a collapsing tank to a new one.
this did it beautifully, thank you.
Arthur | 27 November 2012
Used for five minutes did not, realize pump went dry for approx one and a half minutes, so the pump burnt straight out,
William mcghee | 04 October 2012
Good quality and value for money.
Rupert richardson | 08 August 2012
It works well on a mains-powered drill, but i was hoping to use it on a rechargeable one and it flattens mine before it pumps out what i need to pump out. i also don't like the requirement to immerse it in water to pre-fill it before use. it's just inconvenient. when (if) it breaks i'll try something else.
David | 07 August 2012
Used to move 700l of kerosene from tank to vessels and back. You need a drill that can work anticlockwise hose fittings a bit flimsy - broke one. Very pleased overall and good value
John | 12 July 2012
Had mixed results with this.
financially it's a good deal because you get the fittings that are normally not included with these pumps.
problem is this seems to work when it feels like it, which is frustrating.
when it works - excellent. I cleared a flooded path in 10-15 minutes but then it seemed to jam up and got very hot. Took it apart and there's no rubbish inside so still working on this problem.
also one of the screw-on fittings broke but i have plenty of spares so that was a simple fix.
Tom | 11 June 2012
Have only used the pump twice (once to transfer a butt full of water to amother butt and once to empty a large planter to a butt - it had fill with rain water and was too heavy to move) on both occasions it performed better than expected - it is easily connected to existing hoses with standard hozelock connectors. Brilliant.
Stephen callaghan | 18 April 2012
Done just as it said on the box several friend have also made use of my pump and all been happy
Richard woodling | 28 March 2012
I used this pump to push a hydrochloric solution around my combi boiler to de-scale the heat exchanger. It worked absolutely fine and was run at slow speed for 3 hours on and off. Totally reliable and whole job cost me the price of the pump and the de-scaler. I saved hundreds of pounds. Very reliable pump complete with fittings- great value.
pete | 16 September 2011
Used it to pump out a waterlogged conservatory build after a heavy rain storm. this happened three times so the pump was used on a moderate drill speed setting for at least 90 mins in total. It worked extremely well and cleared lots of murky water. used it to empty water tank ... Again excellent throughput of water .....
chris elliott | 14 August 2011
Did the job that i wanted it to do easily, very good value for money and quick delivery, very pleased.
peter lynch | 16 June 2011
This little pump was abused badly - but it never stopped. it shifted over a 1000ltrs of heating oil in a little over an hour and a week latter it did the some again. i have flushed it out and cleaned it ready for the next time. outstanding bit of kit - highly recommended.
Was this review helpful to you? Yes | No
(1 of 1 people found this useful)
You may need Adobe Reader to view some of our downloads.
If you do not already have it installed please click the icon to the left to install
If you require more information or assistance with this product please consult the links below :
If you have a bulk order for this item then we may be able to offer you an extra discount. Please call our order line on 0844 335 3902 for a quote.
Please note : to qualify for a bulk discount where not already specified on the website, a bulk order would be considered to be normally a minimum of around 100 units for lower value items, and sometimes less if it is high value item.
Tooled-Up.com78 Suez RoadBrimsdownEnfieldMiddlesexEN3 7PSTel : 0844 335 3902