Tenon Saws

Showing 14 results

Stanley FatMax Tenon Saw

2 types £12.95

available

Jack Xpert Hardpoint Tenon Saw

2 types from £12.95

available

Bosch FS200 ABU Saw Blade

£18.95

available

Footprint 256 Brass Back Tenon Saw

3 types from £82.95

available

Draper Expert Supercut Hardpoint Tenon Saw

2 types from £14.95

available

Draper Venom Double Ground Tenon Saw

2 types from £7.95

available

Bahco PrizeCut Tenon Saw

£16.95

out of stock

Roughneck Hardpoint Tenon Saw

£12.95

out of stock

Showing 14 results

Loading Loading...

End of content

Error - No more pages to load

Tenon Saw

Tenon Saws Information

The Tenon Saw gets its name from the tenon in a mortice & tenon joint, the cutting of which its one of its primary specialities. However, the average woodworker is perhaps most likely to use one in combination with a mitre box or mitre block, in order to obtain precise 90° or 45° cuts. Equipped with a fine toothed blade designed for clean cutting, the tenon saw also benefits from a stiffening rib which runs along the top of the tool and prevents it from wobbling during use.

Here's our Quick Application Guide:

• Length - an important consideration, depending on the size of the material you are cutting. However, most tenon saws are generally manufactured around the 300mm mark.
• TPI - TPI stands for Teeth Per Inch. Saws with a low TPI value will cut quickly but coarsely, while saws with a higher TPI count will cut slowly but produce finer cuts. Tenon saws usually start at around 10TPI which is generally considered a fine cut, and anything over this can be expected to give progressively cleaner results.

^ Top