# Air Tools

**Category Path**: Air Tools & Compressors > Air Tools

Shop air tools at Tooled-Up. Browse air impact wrenches, nail guns, sanders, grinders & more. Professional pneumatic tools. Fast UK delivery & expert support.

About Air Tools Air tools, also known as pneumatic tools, are power tools driven by compressed air supplied by an air compressor. Offering exceptional power-to-weight ratios and unmatched reliability, air tools have been the backbone of professional workshops, garages, and construction sites across the UK for decades. From high-speed air sanders and impact wrenches to precision air brushes and nail guns, pneumatic tools deliver consistent performance in demanding trade environments where durability and sustained power output are essential. The comprehensive selection at Tooled-Up.com encompasses everything from heavy-duty air impact wrenches for automotive work to delicate air engravers for detailed finishing. Whether you're a professional mechanic requiring reliable air ratchets for daily vehicle maintenance, a carpenter relying on air nail guns for fast installation work, or a fabricator needing precision air die grinders, pneumatic solutions offer engineering excellence for efficiency and longevity. Air tools excel in continuous-use applications where electric alternatives would overheat, making them indispensable for production environments and busy workshops. Their simple yet robust construction means fewer moving parts than electric counterparts, typically requiring less maintenance whilst withstanding harsher working conditions and providing consistent torque output regardless of duty cycle. When paired with a quality air compressor and proper airline setup, pneumatic tools offer professional tradespeople a cost-effective, powerful solution that can outlast multiple generations of electric tools. The key advantage lies in their unlimited runtime – with no batteries to charge or motors to overheat, air tools maintain peak performance throughout extended work sessions, making them the preferred choice for high-volume production work and demanding trade applications. Jargon Buster CFM (Cubic Feet per Minute): The volume of air an air tool consumes during operation. Matching your tool's CFM requirement with your compressor's output is critical for optimal performance. Most professional air tools require between 4-10 CFM at 90 PSI. PSI (Pounds per Square Inch): The pressure at which compressed air is delivered to the tool. Standard operating pressure for most air tools is 90 PSI, though some applications require higher pressures up to 120 PSI. Always check manufacturer specifications. Air Consumption: The amount of compressed air a tool uses, typically measured in CFM at a specific PSI. Tools with higher air consumption require larger compressors with greater storage capacity to maintain consistent performance. Quick Coupler: A rapid-connect fitting that allows you to quickly attach and detach air tools from air hoses without tools. Quality couplers prevent air leaks and maintain pressure for efficient operation. Duty Cycle: The percentage of time a compressor can run within a given period. Air tools benefit from compressors with higher duty cycles, especially in professional settings where continuous operation is required. FRL Unit (Filter, Regulator, Lubricator): Essential components that clean compressed air, regulate pressure, and lubricate pneumatic tools to extend their service life and maintain optimal performance. Who Uses Air Tools? Air tools are essential equipment across numerous trades and industries throughout the UK: Motor Mechanics and Auto Technicians: Impact wrenches, air ratchets, and die grinders for vehicle maintenance and repair Body Shop Professionals: Air sanders, spray guns, and panel tools for automotive refinishing and restoration Carpenters and Joiners: Air nail guns and staplers for fast, efficient fixing on site and in workshops Metal Fabricators and Engineers: Air grinders, nibblers, and punches for precise metalworking applications Plant and Machinery Maintenance Teams: Heavy-duty impact wrenches and grease guns for industrial equipment servicing Construction Workers: Air nail guns, hammers, and inflators for general site work and equipment maintenance Cabinet Makers and Furniture Manufacturers: Brad nailers and pin guns for delicate assembly work Tyre Fitters: Impact wrenches and air inflators for wheel removal and tyre inflation Artists and Decorators: Air brushes for detailed painting and custom finishing work DIY Enthusiasts: Homeowners tackling renovation projects requiring professional-grade fastening and finishing How to Choose the Right Air Tools Assess Your Air Compressor Capacity: Before purchasing any air tool, verify your compressor's CFM output and tank capacity. Each pneumatic tool has specific air consumption requirements, and your compressor must deliver sufficient volume to maintain operating pressure. Running air tools on undersized compressors leads to pressure drops and poor performance. Match Tool Specifications to Applications: Consider the specific tasks you'll perform. Impact wrenches come in various drive sizes (1/4", 3/8", 1/2", 3/4", 1") with different torque outputs. Sanders are available in orbital, random orbital, and belt configurations. Select tools engineered for your particular requirements rather than general-purpose alternatives. Consider Frequency of Use: Professional-grade air tools feature superior construction, better bearings, and enhanced durability for daily workshop use. If you're running a busy garage or fabrication shop, invest in quality brands from Tooled-Up.com known for reliability. For occasional DIY use, mid-range options offer excellent value. Evaluate Ergonomics and Weight: Air tools are typically lighter than cordless alternatives, but comfort still matters for extended use. Tools with ergonomic grips, vibration dampening, and balanced weight distribution reduce operator fatigue, particularly important for sanders and grinders used for prolonged periods. Check Air Inlet Size and Fittings: Most air tools feature 1/4" BSP connections, but larger tools may require 3/8" or 1/2" fittings. Ensure your airline setup matches your tools' requirements, and invest in quality quick couplers for efficient tool changes. Plan Your Airline Infrastructure: Consider hose diameter (typically 8mm or 10mm internal diameter) and length. Longer hoses and smaller diameters create pressure drops. For professional workshops, consider installing fixed airline systems with multiple drop points to maximise efficiency. Popular Accessories Air Compressors: The power source for all pneumatic tools, available in various capacities from portable 24-litre units to industrial 200-litre+ models Air Hoses: Reinforced rubber or hybrid polymer hoses in various lengths, with anti-kink properties for workshop flexibility Quick Couplers and Fittings: Brass or steel connectors for rapid tool changes and secure, leak-free connections FRL Units: Essential for cleaning compressed air, controlling pressure, and lubricating tools Air Tool Oil: Specialised lubricants that prevent internal corrosion and maintain optimal tool performance Hose Reels: Wall-mounted or ceiling-mounted reels that keep airlines organised and prevent trip hazards Air Line Adaptors and Connectors: Various BSP fittings, tees, and manifolds for custom airline configurations Pressure Gauges: For monitoring and maintaining correct operating pressures at point of use Consumables: Sanding discs, grinding wheels, chisel sets, and other tool-specific accessories Storage Solutions: Protective cases and foam inserts to keep air tools organised and protected when not in use Safety Information Personal Protective Equipment: Always wear appropriate safety glasses or face shields when operating air tools, as compressed air and debris pose serious eye injury risks. Use hearing protection with high-noise tools such as air hammers and impact wrenches. Wear suitable gloves for grip and vibration dampening, and ensure dust masks or respirators are worn when sanding or grinding operations create airborne particles in accordance with HSE guidelines. Compressed Air Hazards: Never point compressed air at yourself or others, even in jest. Compressed air can penetrate skin and cause serious internal injuries or air embolisms. Never use compressed air to clean clothing while wearing it. Always disconnect air supply before changing accessories or performing maintenance on pneumatic tools. Tool Maintenance and Inspection: Regularly inspect air tools and hoses for damage, wear, or leaks. Damaged hoses can whip violently when pressurised. Ensure all connections are secure before pressurising the system. Lubricate air tools according to manufacturer instructions to prevent premature wear and potential failure. Pressure Management: Do not exceed the maximum operating pressure specified by tool manufacturers. Over-pressurising tools can cause catastrophic failure and serious injury. Install and use pressure regulators to maintain safe, consistent operating pressures. Work Environment: Ensure adequate ventilation when using air tools that generate dust, fumes, or spray. Maintain clean, organised workspaces to prevent trip hazards from air hoses. Secure loose clothing and tie back long hair to prevent entanglement with rotating tool components. Frequently Asked Questions What size air compressor do I need for air tools? The compressor size depends on your tools' CFM requirements and usage patterns. For occasional DIY use with brad nailers or inflators, a 25-50 litre compressor delivering 6-8 CFM is adequate. Professional mechanics using impact wrenches and air ratchets continuously should consider 100+ litre compressors with 12-15 CFM output. Always total the CFM requirements of tools you'll run simultaneously and add 30% headroom for optimal performance. Are air tools better than cordless electric tools? Both have advantages depending on application. Air tools offer superior power-to-weight ratios, unlimited runtime (no batteries to charge), lower initial tool costs, and exceptional durability. They excel in workshop environments with fixed compressor installations. Cordless tools provide unmatched portability for site work without air supply infrastructure. Many professionals maintain both pneumatic and cordless tool collections for different scenarios. How often should I lubricate my air tools? Add several drops of air tool oil into the air inlet before each use, or install an inline lubricator for automatic lubrication. For daily professional use, lubricate at the start of each work session. Tools used intermittently should be lubricated before each use and before storage. Proper lubrication prevents internal corrosion, reduces wear, and maintains optimal performance throughout the tool's service life. Can I use an air tool with a smaller compressor than recommended? Using undersized compressors leads to frequent pressure drops, reduced tool performance, excessive compressor cycling, and premature compressor wear. The tool may function initially but will lose power as tank pressure depletes. For sustained professional use, always match or exceed the manufacturer's CFM recommendations. For very occasional DIY tasks, slight undersizing is workable if you allow recovery time between operations. What pressure should I run my air tools at? Most air tools operate optimally at 90 PSI (6.2 bar), though specifications vary by tool type and manufacturer. Always consult the tool's manual or data plate for recommended operating pressure. Impact wrenches may require 90-120 PSI for maximum torque, whilst delicate air brushes operate at much lower pressures around 30-40 PSI. Install adjustable regulators to fine-tune pressure for each application and prevent tool damage from over-pressurisation.

## Products

- [DeWalt DPSB2IN1 2 in 1 Brad Air Nail and Staple Gun](https://www.tooled-up.com/dewalt-dpsb2in1-2-in-1-brad-air-nail-and-staple-gun/prod/254778/) - £189.95
- [DeWalt DPN2330 23 Gauge Headless Pinner Air Nail Gun](https://www.tooled-up.com/dewalt-dpn2330-23-gauge-headless-pinner-air-nail-gun/prod/239740/) - £189.95
- [DeWalt DPN1664 16 Gauge Finish Air Nail Gun](https://www.tooled-up.com/dewalt-dpn1664-16-gauge-finish-air-nail-gun/prod/226619/) - £249.95
- [DeWalt DPN9033SM Short Magazine Framing Air Nailer Gun](https://www.tooled-up.com/dewalt-dpn9033sm-short-magazine-framing-air-nailer-gun/prod/236084/) - £289.99
- [Sealey Air Blow Gun Side Outlet](https://www.tooled-up.com/sealey-air-blow-gun-side-outlet/prod/290660/) - from £49.95
- [Makita AF506 18 Gauge Brad Air Nail Gun](https://www.tooled-up.com/makita-af506-18-gauge-brad-air-nail-gun/prod/506671/) - £125.95
- [Tacwise DGN50V 18 Gauge Brad Air Nail Gun](https://www.tooled-up.com/tacwise-dgn50v-18-gauge-brad-air-nail-gun/prod/198033/) - £109.95
- [Rapid Airtac Pro PB161 Air Brad Nailer](https://www.tooled-up.com/rapid-airtac-pro-pb161-air-brad-nailer/prod/226129/) - £222.95
- [Rapid Airtac PS111 Air Stapler](https://www.tooled-up.com/rapid-airtac-ps111-air-stapler/prod/241372/) - £85.95
- [Sealey SA6004 Compact Twin Hammer Air Impact Wrench 3/4" Drive](https://www.tooled-up.com/sealey-sa6004-compact-twin-hammer-air-impact-wrench-3-4-drive/prod/211307/) - £393.95
- [Sealey SA120 Industrial Air Chipping Hammer](https://www.tooled-up.com/sealey-sa120-industrial-air-chipping-hammer/prod/27830/) - £256.95
- [Makita AF353 23 Gauge Air Pin Nail Gun](https://www.tooled-up.com/makita-af353-23-gauge-air-pin-nail-gun/prod/506670/) - £119.95
- [Sealey SA686 Compact Twin Hammer Air Impact Wrench 1" Drive](https://www.tooled-up.com/sealey-sa686-compact-twin-hammer-air-impact-wrench-1-drive/prod/187058/) - £871.95
- [Rapid Airtac Pro PS141 Air Stapler](https://www.tooled-up.com/rapid-airtac-pro-ps141-air-stapler/prod/229653/) - £91.95
- [Rapid Airtac PS101 Air Stapler](https://www.tooled-up.com/rapid-airtac-ps101-air-stapler/prod/234588/) - £77.95
- [Rapid Airtac Pro PB131 Air Brad Nailer](https://www.tooled-up.com/rapid-airtac-pro-pb131-air-brad-nailer/prod/272897/) - £97.95
- [Sealey DFSK01 Dust Free Sanding Kit](https://www.tooled-up.com/sealey-dfsk01-dust-free-sanding-kit/prod/517709/) - £874.95
- [Sealey SA355 Air Belt Sander](https://www.tooled-up.com/sealey-sa355-air-belt-sander/prod/27907/) - £180.95
- [Sealey SA4 Heavy Duty Air Impact Wrench 3/4" Drive](https://www.tooled-up.com/sealey-sa4-heavy-duty-air-impact-wrench-3-4-drive/prod/27922/) - £135.95
- [Bostitch TU-216-2330k-E 23 Gauge Air Headless Pinner](https://www.tooled-up.com/bostitch-tu-216-2330k-e-23-gauge-air-headless-pinner/prod/160667/) - £237.95
- [Sealey GSA6004 Twin Hammer Air Impact Wrench 3/4" Drive](https://www.tooled-up.com/sealey-gsa6004-twin-hammer-air-impact-wrench-3-4-drive/prod/170636/) - £341.95
- [Bostitch F33PTSM-E Framing Air Nail Gun](https://www.tooled-up.com/bostitch-f33ptsm-e-framing-air-nail-gun/prod/140683/) - £472.95
- [Bostitch SX1838-E Air Staple Gun](https://www.tooled-up.com/bostitch-sx1838-e-air-staple-gun/prod/166995/) - £196.95
- [Sealey SA141 Air Impact Wrench and Diesel Glow Plug Set 1/4" Drive](https://www.tooled-up.com/sealey-sa141-air-impact-wrench-and-diesel-glow-plug-set-1-4-drive/prod/211290/) - £192.95
- [Sealey 10 Piece Mini Air Brush Kit](https://www.tooled-up.com/sealey-10-piece-mini-air-brush-kit/prod/220651/) - £173.95
- [Sealey SA635 Air Belt Sander](https://www.tooled-up.com/sealey-sa635-air-belt-sander/prod/170742/) - £155.95
- [Bostitch MCN150-E Joist Hangers Air Nail Gun](https://www.tooled-up.com/bostitch-mcn150-e-joist-hangers-air-nail-gun/prod/146036/) - £283.95
- [Einhell 5 Piece Air Tool Accessory Kit](https://www.tooled-up.com/einhell-5-piece-air-tool-accessory-kit/prod/573414/) - £28.95
- [Sealey SA152 Air Angle Grinder 100mm](https://www.tooled-up.com/sealey-sa152-air-angle-grinder-100mm/prod/139007/) - £246.95
- [Sealey SA6008 1" Drive Twin Hammer Air Impact Wrench](https://www.tooled-up.com/sealey-sa6008-1-drive-twin-hammer-air-impact-wrench/prod/498575/) - £808.95
- [Sealey SA297 Air Impact Wrench 1" Drive](https://www.tooled-up.com/sealey-sa297-air-impact-wrench-1-drive/prod/170735/) - £372.95
- [Sealey SA6002 Twin Hammer Air Impact Wrench 1/2" Drive](https://www.tooled-up.com/sealey-sa6002-twin-hammer-air-impact-wrench-1-2-drive/prod/134045/) - £197.95
- [Sealey SA604 Super Duty Air Impact Wrench 3/4" Drive](https://www.tooled-up.com/sealey-sa604-super-duty-air-impact-wrench-3-4-drive/prod/27947/) - £457.95
- [Bahco Air Blow Gun](https://www.tooled-up.com/bahco-air-blow-gun/prod/206241/) - £25.95
- [Sealey GSA312 Air Riveter](https://www.tooled-up.com/sealey-gsa312-air-riveter/prod/498468/) - £136.95
- [Sealey GSA314 Heavy Duty Air Riveter](https://www.tooled-up.com/sealey-gsa314-heavy-duty-air-riveter/prod/498469/) - £205.95

*Showing 36 of 404 products (page 1 of 12)*

---
**URL**: https://www.tooled-up.com/air-tools/cat/100312/
