# Hammer Handles

**Category Path**: Hand Tools > Demolition Tools > Hammers > Handles & Wedges > Hammer Handles

Shop hammer handles at Tooled-Up. Hickory claw, ball pein, sledge and club hammer shafts from Faithfull and Draper. Fast delivery. Expert advice available.

About Hammer Handles Hammer handles are essential replacement components that breathe new life into worn, damaged or broken hammers, allowing tradespeople and DIY enthusiasts to restore their tools to full working condition. Rather than discarding an entire hammer when the handle fails—which can happen through natural wear, splitting or accidental breakage—a replacement shaft offers an economical and sustainable solution that preserves the hammer head whilst ensuring continued safe operation. These precision-engineered components are available in various lengths and fitting dimensions to suit different hammer types including claw hammers, club hammers, sledge hammers, ball pein hammers, joiners hammers and pin hammers. Quality replacement handles are predominantly manufactured from straight-grained hickory wood, a material prized throughout the construction and metalworking industries for its exceptional strength-to-weight ratio and natural shock-absorbing properties. The hickory used by reputable manufacturers like Faithfull and Draper undergoes careful selection to ensure consistent grain orientation and freedom from knots or defects that could compromise structural integrity. Many handles available from Tooled-Up.com feature FSC certification, demonstrating responsible forestry practices without sacrificing the durability and performance characteristics demanded by professional users. Most replacement shafts come complete with appropriately sized wedges—essential components that secure the hammer head and prevent dangerous loosening during striking operations. For professional tradespeople maintaining extensive toolkits and DIY enthusiasts restoring family heirloom tools alike, investing in proper replacement handles represents sound economic sense. The cost of a quality hickory shaft is a fraction of purchasing a complete new hammer, yet delivers the same performance and safety standards when correctly fitted. With proper installation and maintenance, these replacement components can provide years of reliable service across demanding applications from construction sites to engineering workshops. Jargon Buster Hickory A hardwood species native to North America, universally regarded as the premium material for hammer handles due to its exceptional strength, flexibility and shock-absorbing characteristics. The unique grain structure of hickory naturally dissipates impact forces, reducing user fatigue whilst resisting splitting under repeated stress. Eye The tapered aperture through the hammer head where the handle shaft is inserted. The eye is typically wider at the top to accommodate the wedge and create a secure taper-lock fitting that mechanically prevents the head from detaching during use. Wedge A small tapered piece of wood or metal driven into a slot at the top of the handle after the head is fitted. The wedge expands the wood fibres inside the hammer head's eye, creating a mechanical lock that ensures the head remains securely attached throughout the tool's operational life. Grain Orientation The directional alignment of wood fibres running through the handle shaft. Properly oriented grain running parallel to the striking direction maximises structural strength and prevents breakage under load, which is why quality manufacturers carefully select straight-grained hickory. FSC-Certified Forest Stewardship Council certification indicating the timber originates from responsibly managed forests meeting rigorous environmental, social and economic standards. FSC-certified hickory provides assurance of sustainable sourcing without compromising the performance characteristics required for professional applications. Shaft Length The overall measurement from handle base to top, which varies significantly depending on hammer type and intended application. Longer shafts on sledge hammers provide greater leverage for demolition work, whilst shorter handles on pin hammers offer enhanced control for precision tasks. Who Uses Hammer Handles? Replacement hammer handles are essential components for maintaining tools across numerous trades and applications: General Builders - maintaining claw hammers and club hammers for everyday construction and site work Carpenters and Joiners - replacing worn handles on specialist joiners hammers and claw hammers used for precise woodworking operations Demolition Contractors - fitting new shafts to heavy-duty sledge hammers subjected to intensive daily use Metalworkers and Engineers - restoring ball pein hammers and cross pein hammers used for metal shaping and fabrication Roofers - maintaining slate hammers and specialist roofing tools exposed to demanding working conditions Landscapers and Groundworkers - replacing club hammer handles used extensively for fencing, paving and hard landscaping Tool Hire Companies - refurbishing rental equipment to maintain fleet condition and safety standards DIY Enthusiasts - restoring inherited or vintage hammers with sentimental value or collector interest Maintenance Teams - keeping facility and site tools operational without the expense of complete replacement Agricultural Workers - maintaining farm implements subjected to harsh outdoor environments and varied applications How to Choose the Right Hammer Handles Hammer Type Compatibility: Ensure the replacement handle is specifically designed for your hammer type. Claw hammer handles differ substantially from sledge hammer shafts in both length and eye fitting dimensions. Always verify product specifications against your hammer head's eye size and taper configuration before purchasing to guarantee proper fit and safe operation. Handle Length Selection: Choose a shaft length appropriate to the original tool design and your intended application. Short handles (250-350mm) suit pin hammers and small ball pein hammers where controlled precision work is required. Medium lengths (350-450mm) are ideal for general purpose claw hammers and joiners hammers used in carpentry and construction. Long handles (600-900mm) provide the leverage necessary for club hammers and sledge hammers deployed in demolition and heavy-duty applications. Material Quality: Prioritise genuine hickory rather than cheaper alternatives such as ash or synthetic materials. The selection available at Tooled-Up includes FSC-certified hickory from established manufacturers like Faithfull and Draper, ensuring consistent grain quality and sustainable sourcing. Inspect product descriptions to confirm straight grain without knots or defects that could compromise structural integrity under load. Wedge Inclusion: Verify whether wedges are supplied with the handle, as these components are absolutely essential for secure fitting. Most quality replacements include appropriately sized wooden or metal wedges matched to the handle dimensions. Without the correct wedge, you risk the hammer head loosening during use, creating a serious safety hazard that could result in injury or property damage. Brand Reputation: Established manufacturers maintain strict quality control over grain selection, moisture content and dimensional accuracy. Brands like Draper and Faithfull have earned professional trust through consistent product quality and reliable performance. These manufacturers also provide better consistency if you need to replace multiple handles across an extensive toolkit. Finish and Surface Treatment: Quality handles feature smooth, splinter-free finishes that won't cause hand irritation during extended use. Many are sanded and waxed for added comfort and strength. Whilst some handles have protective lacquers, many experienced tradespeople prefer untreated hickory for superior grip characteristics, particularly when working in hot conditions where perspiration affects tool control. Popular Accessories Replacement Wedges - spare wooden and metal wedges in various sizes for secure hammer head fitting and re-wedging operations Linseed Oil - traditional wood treatment to preserve and protect hickory handles from moisture penetration and splitting Wood Rasps and Files - for fine-tuning handle dimensions to achieve perfect fit in the hammer head eye Replacement Hammer Heads - heads in various styles and weights to pair with new handles for complete tool restoration Work Gloves - protective gloves to improve grip comfort and reduce vibration transmission during extended hammer use Tool Belts and Hammer Holders - for convenient carrying of restored hammers on site without repeated bending Sandpaper and Abrasives - for smoothing and finishing handle surfaces to personal comfort preferences Wood Adhesive - additional security for handle-to-head joints in specialist applications where extra holding power is beneficial Tool Storage Solutions - protect restored hammers from damage during transport and storage between jobs Safety Information Proper installation and ongoing maintenance of hammer handles is critical for safe tool operation and compliance with workplace safety requirements. Always ensure the replacement handle is securely fitted with appropriate wedges driven home firmly before first use. A loose hammer head can detach during striking, causing serious injury to the user or bystanders through flying debris or loss of control. The HSE recommends regular tool inspections as part of workplace safety protocols, particularly for hand tools subjected to impact forces. Check the handle fitting regularly, especially during the first few hours of use, and re-wedge if any looseness develops as the hickory settles into the eye. Inspect handles before each use session for cracks, splits or damage that could cause catastrophic failure under load. Never use a hammer with a compromised handle, as it may fracture during striking, resulting in loss of control and potential injury. Replace handles immediately upon noticing any deterioration including surface checking, splits developing from the wedge slot, or looseness that cannot be remedied by re-wedging. When fitting a new handle, follow manufacturer instructions carefully regarding wedge installation technique and any recommended settling period. Some hickory handles may require re-wedging after initial use as the wood compresses slightly within the hammer head eye—this is normal behaviour and should be anticipated. Wear appropriate PPE including safety glasses or goggles when using any hammer, as striking operations can generate flying debris regardless of handle condition. Protective gloves can reduce vibration transmission and improve grip security, particularly during extended use. Store hammers in dry conditions to prevent moisture absorption that can cause wood swelling, dimensional changes or rot. Avoid leaving tools in damp environments, unheated vehicle boots or exposed outdoor locations where condensation can accumulate. Properly maintained hickory handles should provide years of reliable service when given appropriate care and protection from environmental extremes. Frequently Asked Questions How do I properly fit a replacement hammer handle? Remove all remnants of the old handle from the hammer head eye using a drill, chisel or burn-out method, ensuring the eye is completely clean and free from debris. Insert the new handle through the eye from the bottom, tapping it firmly with another hammer or mallet until the head sits at the correct position relative to the handle length. The handle should protrude slightly above the top of the head. Insert the wedge into the pre-cut slot at the top of the handle and drive it in firmly until secure—the wedge should sit flush or slightly below the handle surface. Some handles may require trimming to achieve perfect fit; use a saw and rasp to adjust carefully whilst maintaining the taper that ensures proper seating in the eye. Why is hickory the preferred material for hammer handles? Hickory combines exceptional tensile strength with natural shock-absorbing properties resulting from its unique cellular structure and grain characteristics. It's significantly stronger than most alternative hardwoods whilst remaining flexible enough to absorb impact forces effectively, reducing user fatigue and minimising the risk of handle breakage during normal operation. Hickory's outstanding resistance to splitting makes it ideally suited for the repeated mechanical stresses of hammer use, which is why it's been the professional tradesperson's choice for generations and remains the industry standard for quality replacement handles. Can I use my hammer immediately after fitting a new handle? Whilst you can use the hammer after proper wedging and ensuring the head is firmly seated, it's advisable to check the tightness after the first hour or so of use. Hickory can compress slightly as it settles into the eye under initial loading, potentially requiring the wedge to be driven in further to maintain security. Many experienced tradespeople re-check and re-wedge after the first day of use to ensure optimal security, then periodically thereafter depending on usage intensity. This practice significantly reduces the risk of the head loosening during demanding applications. How long should a quality hickory hammer handle last? With proper care, appropriate use for the tool's intended application and correct storage conditions, a quality hickory handle can last many years, potentially decades. Lifespan depends heavily on usage intensity, working environment and maintenance practices. Professional tradespeople using hammers daily in demanding construction or demolition work may need to replace handles every few years, whilst occasional DIY users might never require replacement throughout the tool's life. Regular inspection, protection from moisture and avoiding misuse such as striking hardened steel significantly extends handle life expectancy. Are all hammer handles interchangeable between different hammer types? No, hammer handles vary considerably in both overall length and eye fitting dimensions depending on the hammer type, size and intended application. A claw hammer handle differs substantially from a club hammer shaft, which differs again from a sledge hammer handle in both dimensional specifications and taper configuration. Always match the replacement handle specifically to your hammer type and verify dimensional compatibility with your particular hammer head before purchasing. Using an incorrectly sized handle compromises both safety and tool performance, potentially creating dangerous working conditions.

## Products

- [Faithfull FSC Hickory Sledge Hammer Handle](https://www.tooled-up.com/faithfull-fsc-hickory-sledge-hammer-handle/prod/782347/) - from £11.95
- [Faithfull FSC Hickory Joiners Hammer Handle](https://www.tooled-up.com/faithfull-fsc-hickory-joiners-hammer-handle/prod/787364/) - from £6.95
- [Faithfull FSC Hickory Ball Pein Hammer Handle](https://www.tooled-up.com/faithfull-fsc-hickory-ball-pein-hammer-handle/prod/787353/) - from £6.49
- [Faithfull FSC Hickory General Purpose Hammer Handle](https://www.tooled-up.com/faithfull-fsc-hickory-general-purpose-hammer-handle/prod/787351/) - £7.49
- [Faithfull FSC Hickory Pin Hammer Handle](https://www.tooled-up.com/faithfull-fsc-hickory-pin-hammer-handle/prod/787367/) - £6.49
- [Faithfull FSC Hickory Claw Hammer Handle](https://www.tooled-up.com/faithfull-fsc-hickory-claw-hammer-handle/prod/787360/) - £7.95
- [Draper Expert Hickory Hammer Shaft and Wedge](https://www.tooled-up.com/draper-expert-hickory-hammer-shaft-and-wedge/prod/13188/) - £9.95
- [Draper Hickory Ball and Cross Pein Hammer Shaft](https://www.tooled-up.com/draper-hickory-ball-and-cross-pein-hammer-shaft/prod/15226/) - £11.95
- [Draper Hickory Club Hammer Shaft and Wedge](https://www.tooled-up.com/draper-hickory-club-hammer-shaft-and-wedge/prod/15225/) - £8.95
- [Draper Hickory Sledge Hammer Shaft](https://www.tooled-up.com/draper-hickory-sledge-hammer-shaft/prod/20409/) - £19.95
- [Draper Hickory Claw Hammer Shaft and Wedge](https://www.tooled-up.com/draper-hickory-claw-hammer-shaft-and-wedge/prod/13189/) - £10.95

---
**URL**: https://www.tooled-up.com/hammer-handles/cat/2000261/
