# Screwdriver Bit Holders

**Category Path**: Power Tool Accessories > Screwdriver Bits & Holders > Screwdriver Bit Holders

Shop screwdriver bit holders at Tooled-Up. Magnetic holders, quick-change adaptors & impact-rated models from DeWalt, Bosch & more. Fast UK delivery.

About Screwdriver Bit Holders Screwdriver bit holders are essential accessories that bridge the gap between your power tools and screwdriver bits, transforming the efficiency and versatility of drilling and driving operations. These ingenious attachments accept standard 1/4" hex shank bits and enable them to be used with impact drivers, drills, and other power tools that might otherwise be incompatible with shorter 25mm bits. Available in lengths ranging from compact 60mm versions to extended 150mm and beyond, bit holders provide the reach and flexibility needed for awkward locations whilst ensuring bits remain securely attached during use. The range at Tooled-Up.com encompasses three primary types of bit holder, each designed for specific applications. Basic magnetic bit holders use powerful magnets to retain bits in place, allowing for quick swapping without mechanical releases. Quick release or locking bit holders feature a collar mechanism that grips bits securely, preventing them from detaching when screws become stuck or when working overhead. Impact-rated bit holders are specifically engineered to withstand the high-torque, percussive forces generated by impact drivers, featuring reinforced construction that prevents fracturing under stress. Leading manufacturers including DeWalt, Bosch Professional, and Faithfull produce bit holders to suit every budget and application, from light DIY tasks to demanding professional site work. Beyond simple bit retention, these accessories offer practical advantages that improve productivity and reduce frustration. The magnetic properties transfer to the bit itself, helping to hold screws in position during fastening and preventing drops in hard-to-reach spaces. When used in drill chucks, bit holders eliminate the need to repeatedly chuck and unchuck individual bits, saving valuable time during tasks requiring frequent accessory changes. Extension bit holders provide the additional reach necessary for recessed fixings, furniture assembly, and electrical installation work where standard bit lengths fall short. Jargon Buster 1/4" Hex Shank: The universal six-sided shaft standard for screwdriver bits, measuring 6.35mm across flats. This standardised format ensures compatibility across different brands and tools. Quick Release Collar: A spring-loaded sleeve mechanism that locks bits securely in place during use but releases them instantly when pulled back, combining security with rapid bit changes. Impact Rated: Designation indicating a bit holder has been manufactured from hardened materials and designed to withstand the repetitive hammering action of impact drivers without fracturing or premature wear. Magnetic Bit Retention: The use of permanent magnets within the bit holder to secure bits through magnetic force and transfer magnetism to the bit tip for improved screw retention. Socket Adaptor: A specialised bit holder that converts a 1/4" hex drive into a square socket drive (typically 1/4", 3/8", or 1/2"), allowing socket sets to be used with power tools. Extension Holder: Longer bit holders, typically 150mm to 300mm, that provide additional reach for accessing recessed or awkward fastening locations. Who Uses Screwdriver Bit Holders? Screwdriver bit holders are indispensable across numerous trades and applications: Electricians: For installing back boxes, consumer units, and trunking in confined spaces where standard bit lengths prove inadequate Carpenters and Joiners: Essential for furniture assembly, kitchen fitting, and cabinet installation requiring extended reach General Builders: Daily use for fixing plasterboard, installing door furniture, and general fastening tasks across construction sites Plumbers: Securing pipework, fixing radiators, and installing sanitaryware in tight spaces behind baths and basins Shopfitters and Suspended Ceiling Installers: Working overhead and in recessed locations where extension holders prove invaluable Vehicle Mechanics: Accessing awkward fasteners in engine bays and under vehicle bodies Maintenance Engineers: Servicing machinery and equipment where standard reach tools cannot access fixings DIY Enthusiasts: Home improvement projects, flat-pack furniture assembly, and general repairs Fenestration Installers: Window and door fitting requiring precise fastening in confined frame spaces How to Choose the Right Screwdriver Bit Holders Consider Your Tool Type: If you predominantly use an impact driver, select impact-rated bit holders from manufacturers like DeWalt, Bosch Professional, or Milwaukee. Standard magnetic holders will fail prematurely under impact forces, potentially causing injury or damage. For conventional drills and drill drivers, standard magnetic or quick release holders suffice perfectly. Determine Required Length: For general work, a 60mm holder provides minimal extension whilst maintaining control. The popular 150mm length offers excellent reach for most applications without excessive flexibility. Extended holders of 200-300mm suit specialised applications but can flex during use, reducing precision. Many tradespeople at Tooled-Up purchase multi-piece sets containing several lengths for maximum versatility. Magnetic vs Quick Release: Basic magnetic holders offer the fastest bit changes, ideal when frequently swapping between different driver types. However, bits can occasionally detach if they bind in the workpiece. Quick release holders with locking collars prevent accidental bit loss and provide more secure retention when working overhead or in challenging positions, though they require two hands to change bits. Specialised Adaptors: Consider socket adaptors if you need to use socket sets with power tools, or right-angle holders for accessing fasteners in extremely confined spaces. Flexible shaft holders allow driving around obstacles but sacrifice precision. The Bosch Professional and Festool ranges include innovative designs such as depth stops and guide sleeves for specialised applications. Build Quality: Professional-grade bit holders from established brands feature hardened steel construction, powerful rare-earth magnets, and precision machining for wobble-free operation. Budget options may use weaker magnets and softer materials that wear rapidly under daily use. For professional tradespeople, investing in quality accessories from manufacturers like Wera, Wiha, or Bosch Professional proves economical long-term. Popular Accessories Screwdriver Bit Sets: Comprehensive assortments of Pozidriv, Phillips, Torx, and hex bits in various lengths to complement your bit holders Impact Driver Bits: Torsion zone bits designed to absorb impact forces and extend working life in high-torque applications Bit Storage Cases: Organised storage solutions keeping bits protected and readily accessible on site Socket Sets: Combined with socket adaptors, these expand your power tool's capability to include nut and bolt fastening Right-Angle Attachments: For accessing perpendicular fasteners where straight-line drilling proves impossible Depth Stop Collars: Precision accessories preventing over-driving when consistent fastening depth is critical Magnetic Wristbands: Keeping screws and small fixings within easy reach during installation work Impact Drivers and Drill Drivers: The power tools that bit holders are designed to complement Frequently Asked Questions Can I use a standard bit holder with an impact driver? Whilst physically possible, standard bit holders are not designed to withstand the hammering action of impact drivers and will fracture prematurely. Always use impact-rated bit holders marked as suitable for impact applications. The additional cost is minimal compared to potential tool damage or injury from component failure. Why does my bit keep falling out of the holder? This typically indicates a weak magnet, worn hex socket, or accumulation of metal swarf reducing magnetic contact. Clean both the bit shank and holder socket thoroughly. If the problem persists, the holder may be worn and require replacement. Quick release holders with locking collars eliminate this issue entirely. What's the advantage of longer extension bit holders? Extended holders provide access to recessed fixings behind obstacles, such as installing screws in deep electrical back boxes, securing radiators against walls, or reaching fasteners within furniture carcasses. However, excessive length introduces flexibility that reduces control and precision, so select the shortest length that achieves the necessary reach. Are expensive branded bit holders worth the additional cost? For professional tradespeople using bit holders daily, premium options from manufacturers like Bosch Professional, DeWalt, or Festool offer superior build quality, more powerful magnets, and longer service life. The improved reliability and reduced downtime justify the investment. For occasional DIY use, mid-range options provide perfectly adequate performance. Can bit holders be used with SDS drills? Standard bit holders cannot be inserted directly into SDS chucks. However, specialised SDS-to-hex adaptors are available from manufacturers including Bosch Professional that allow screwdriver bits and bit holders to be used with SDS drills, useful when a single tool must handle both drilling and driving tasks on site.

## Products

- [Milwaukee Shockwave Magnetic Screwdriver Bit Holder](https://www.tooled-up.com/milwaukee-shockwave-magnetic-screwdriver-bit-holder/prod/519844/) - from £8.95
- [Draper Magnetic Screwdriver Bit Holder](https://www.tooled-up.com/draper-magnetic-screwdriver-bit-holder/prod/247276/) - from £1.49
- [Wera 897/4 IMP R Impaktor Magnetic Screwdriver Bit Holder](https://www.tooled-up.com/wera-897-4-imp-r-impaktor-magnetic-screwdriver-bit-holder/prod/185198/) - £19.95
- [Stanley Magnetic Screwdriver Bit Holder](https://www.tooled-up.com/stanley-magnetic-screwdriver-bit-holder/prod/10013/) - £7.49
- [Stanley Magnetic Drywall Screw Adaptor](https://www.tooled-up.com/stanley-magnetic-drywall-screw-adaptor/prod/203351/) - £7.95
- [Milwaukee Shockwave Locking Screwdriver Bit Holder](https://www.tooled-up.com/milwaukee-shockwave-locking-screwdriver-bit-holder/prod/519848/) - from £8.95
- [DeWalt 10 Piece Impact Screwdriver Angled Bit Holder Set](https://www.tooled-up.com/dewalt-10-piece-impact-screwdriver-angled-bit-holder-set/prod/437123/) - £13.95
- [DeWalt Sleeved Magnetic Screwdriver Bit Holder](https://www.tooled-up.com/dewalt-sleeved-magnetic-screwdriver-bit-holder/prod/268570/) - £4.99
- [Stanley Magnetic Screwdriver Bit Holder Pack of 5](https://www.tooled-up.com/stanley-magnetic-screwdriver-bit-holder-pack-of-5/prod/123972/) - £25.95
- [Irwin 1/4" Lock N Load Quick Change Bit Holder](https://www.tooled-up.com/irwin-1-4-lock-n-load-quick-change-bit-holder/prod/213353/) - from £11.95
- [DeWalt Flexi Shaft Screwdriver Bit Holder](https://www.tooled-up.com/dewalt-flexi-shaft-screwdriver-bit-holder/prod/543373/) - £42.95
- [Makita Impact Premier Screwdriver Bit Magnet Booster](https://www.tooled-up.com/makita-impact-premier-screwdriver-bit-magnet-booster/prod/537835/) - £3.49
- [Wera 897/4 Impaktor Heavy Duty Tri Torsion Bit Holder](https://www.tooled-up.com/wera-897-4-impaktor-heavy-duty-tri-torsion-bit-holder/prod/198156/) - £15.95
- [Wera 887/4 RR Rapidaptor Magnetic Quick Release Bit Holder](https://www.tooled-up.com/wera-887-4-rr-rapidaptor-magnetic-quick-release-bit-holder/prod/140457/) - from £18.95
- [DeWalt Impact Screwdriver Angled Bit Holder](https://www.tooled-up.com/dewalt-impact-screwdriver-angled-bit-holder/prod/543375/) - £28.95
- [Wera 899/4/1 S Stainless Steel Retaining Ring Screwdriver Bit Holder](https://www.tooled-up.com/wera-899-4-1-s-stainless-steel-retaining-ring-screwdriver-bit-holder/prod/411981/) - from £9.95
- [Wera Zyklop 3/8" Square Drive Screwdriver Bit Holder](https://www.tooled-up.com/wera-zyklop-3-8-square-drive-screwdriver-bit-holder/prod/178836/) - £22.95
- [DeWalt DT7513T Magnetic Impact Hard Joint Clutch Bit Holder](https://www.tooled-up.com/dewalt-dt7513t-magnetic-impact-hard-joint-clutch-bit-holder/prod/239278/) - £22.95
- [DeWalt Impact Screwdriver Angled Bit Holder](https://www.tooled-up.com/dewalt-impact-screwdriver-angled-bit-holder/prod/543372/) - £34.95
- [Wera Rapidaptor BiTorsion Bit Holder](https://www.tooled-up.com/wera-rapidaptor-bitorsion-bit-holder/prod/132903/) - £22.95
- [Wera 3 Piece 1/4 Hex Shank Socket Adaptor Set](https://www.tooled-up.com/wera-3-piece-1-4-hex-shank-socket-adaptor-set/prod/411662/) - £22.95
- [DeWalt ClicFix Magnetic Quick Change Screwdriver Bit Holder](https://www.tooled-up.com/dewalt-clicfix-magnetic-quick-change-screwdriver-bit-holder/prod/255300/) - £18.95
- [Wera Universal Stainless Steel Magnetic Screwdriver Bit Holder](https://www.tooled-up.com/wera-universal-stainless-steel-magnetic-screwdriver-bit-holder/prod/160643/) - from £6.95
- [Faithfull Impact Rated Quick Release Bit Holder](https://www.tooled-up.com/faithfull-impact-rated-quick-release-bit-holder/prod/355218/) - from £10.95
- [Makita Impact Black Sleeve Chuck Screwdriver Bit Holder](https://www.tooled-up.com/makita-impact-black-sleeve-chuck-screwdriver-bit-holder/prod/707545/) - from £5.95
- [DeWalt Flexi Shaft Screwdriver Angled Bit Holder](https://www.tooled-up.com/dewalt-flexi-shaft-screwdriver-angled-bit-holder/prod/543374/) - £42.95
- [Faithfull Magnetic Bit Holder](https://www.tooled-up.com/faithfull-magnetic-bit-holder/prod/89810/) - £7.49
- [Wera Rapidaptor Magnetic Quick Release Bit Holder](https://www.tooled-up.com/wera-rapidaptor-magnetic-quick-release-bit-holder/prod/160641/) - from £21.95
- [Bosch Professional Magnetic Screwdriver Bit Holder](https://www.tooled-up.com/bosch-professional-magnetic-screwdriver-bit-holder/prod/57516/) - £10.95
- [Faithfull Impact Universal Screwdriver Bit Holder](https://www.tooled-up.com/faithfull-impact-universal-screwdriver-bit-holder/prod/697394/) - £16.95
- [Einhell 3 Piece 1/4" Hex Impact Socket Adaptor Set](https://www.tooled-up.com/einhell-3-piece-1-4-hex-impact-socket-adaptor-set/prod/712789/) - £6.49
- [Faithfull Magnetic Bit Holder](https://www.tooled-up.com/faithfull-magnetic-bit-holder/prod/197372/) - £5.49
- [Faithfull Magnetic Drywall Screwdriver Bit Holder](https://www.tooled-up.com/faithfull-magnetic-drywall-screwdriver-bit-holder/prod/178256/) - £10.95
- [Wera Rapidaptor Bit Holder](https://www.tooled-up.com/wera-rapidaptor-bit-holder/prod/624454/) - £16.95
- [Faithfull Magnetic Extendable Finder and Guide Bit Holder](https://www.tooled-up.com/faithfull-magnetic-extendable-finder-and-guide-bit-holder/prod/178257/) - £5.95
- [Wera 1440/1442SB VDE Screw Gripper Set](https://www.tooled-up.com/wera-1440-1442sb-vde-screw-gripper-set/prod/409755/) - £12.95

*Showing 36 of 117 products (page 1 of 4)*

---
**URL**: https://www.tooled-up.com/screwdriver-bit-holders/cat/2000362/
