# Slotting & Grooving Bits

**Category Path**: Power Tool Accessories > Router Bits & Accessories > Slotting & Grooving Bits

Shop slotting & grooving bits at Tooled-Up. Browse router cutters, biscuit joiners & weatherseal groovers from Trend & Draper. Fast UK delivery.

About Slotting & Grooving Bits Slotting and grooving bits are essential router accessories designed to cut precise slots, grooves, and channels in wood and other materials. These specialised cutting tools enable woodworkers and joiners to create joints, decorative features, and functional recesses with accuracy and consistency. From creating slots for biscuit joinery to cutting weatherseal grooves in door frames, these versatile bits are indispensable for both professional cabinetmaking and advanced DIY projects. The range at Tooled-Up.com includes various configurations to suit different applications: biscuit joinery bits for creating slots in timber edges, ball groover cutters for decorative rounded grooves, tongue and groove sets for creating interlocking joints, and slotter blades with arbors for precision depth control. These bits are typically manufactured with tungsten carbide tips (TCT) to maintain sharpness through extended use, and are available with both 1/4" and 1/2" shanks to fit standard router collets. Quality slotting and grooving bits from manufacturers like Trend and Draper deliver clean, accurate cuts that require minimal sanding or finishing. Whether cutting shallow decorative grooves or deep structural slots, the right bit ensures professional results in applications ranging from furniture construction to architectural joinery work. Jargon Buster TCT (Tungsten Carbide Tipped): Router bits with extremely hard tungsten carbide cutting edges that maintain sharpness significantly longer than standard high-speed steel, essential for consistent results in abrasive materials. Shank Diameter: The cylindrical section that fits into the router collet, typically 1/4" (6.35mm) or 1/2" (12.7mm). Larger shanks provide greater stability and reduce vibration during cutting. Arbor: A shaft or spindle onto which slotter blades are mounted, allowing for adjustable cutting widths by adding spacers and enabling flush cutting in corners and recesses. Biscuit Joint: A woodworking joint made by cutting matching slots in two pieces of timber and joining them with a football-shaped wooden "biscuit" wafer glued in place, providing strong, invisible connections. Bearing Guide: A smooth roller bearing mounted on the bit that runs along the edge of the workpiece, ensuring consistent cutting depth and preventing the bit from cutting too deeply. Weatherseal Groove: A narrow channel cut into door or window frames to accommodate rubber or brush seals that prevent draughts and weather ingress. Who Uses Slotting & Grooving Bits? Cabinet Makers and Joiners: Creating biscuit joints, panel grooves, and decorative features in furniture and fitted cabinetry Carpenters and Chippies: Producing tongue and groove joints for flooring, panelling, and structural timber connections Window and Door Fitters: Cutting weatherseal grooves and glazing rebates in frames and casements Shopfitters: Creating display joinery, shelving systems, and retail fixture joints Furniture Restorers: Matching existing groove profiles and reproducing period joinery details Advanced DIY Enthusiasts: Tackling home improvement projects requiring professional-quality joints and decorative grooves Staircase Manufacturers: Producing slots for string boards, balusters, and handrail connections How to Choose the Right Slotting & Grooving Bits Application Requirements: Identify your specific cutting need first. Biscuit bits create slots for plate joinery, ball groover cutters produce decorative rounded channels, whilst tongue and groove sets create interlocking edge profiles for panelling and flooring. Weatherseal groovers are specifically designed for the narrow channels required in door and window frames. Shank Compatibility: Ensure the bit shank matches your router's collet size. Half-inch shanks provide superior rigidity and reduce vibration for cleaner cuts, making them preferable for demanding applications. Quarter-inch shanks suit smaller trim routers but may flex under heavy loads. Never use reducing sleeves as they compromise safety and cutting quality. Cutting Width and Depth: Match the bit dimensions to your project specifications. Biscuit bits are sized for specific biscuit sizes (No. 0, 10, 20), whilst adjustable slotter systems with arbors and spacers at Tooled-Up offer flexibility for varying groove widths without purchasing multiple fixed-width bits. Material Quality: Professional TCT bits outlast standard high-speed steel by significant margins, justifying their higher initial cost through extended service life and consistent cutting performance. Reputable brands like Trend manufacture bits with precision-ground carbide and balanced bodies that reduce router strain and produce cleaner cuts. Router Power Requirements: Larger diameter bits require routers with adequate power, typically 1200W minimum for 1/2" shank bits. Using underpowered routers risks motor damage, poor cut quality, and safety hazards. Check manufacturer recommendations before purchasing. Popular Accessories Router Tables: Provide stable inverted mounting for accurate, repeatable groove cutting in multiple workpieces Guide Bushes and Templates: Enable precise positioning of grooves and slots using jigs and patterns Collet Extensions: Allow deeper cutting by extending bit reach below the router base Biscuit Wafers: Compressed beech jointing plates in various sizes (No. 0, 10, 20) for use with biscuit joinery slots Arbor Spacers: Adjust cutting width on slotter arbor systems for customised groove dimensions Router Speed Controller: Enables optimal cutting speeds for different materials and bit diameters Extraction Hoses and Adaptors: Connect routers to dust extractors for cleaner working conditions and extended bit life Setting Gauges: Accurately position fences and bit heights for consistent results Safety Information Personal Protective Equipment: Always wear safety glasses or a full face shield when routing, as fine dust and wood chips eject at high velocity. Use hearing protection, as routers operate at damaging noise levels, particularly when cutting grooves which generates sustained high-frequency sound. Wear a dust mask or respirator rated for fine wood dust, which poses serious long-term respiratory health risks. Secure Workpiece Clamping: Never attempt to rout slots or grooves in hand-held workpieces. Always clamp work securely to a bench or mount it in a router table. Movement during cutting can cause bit grab, leading to workpiece ejection or router kickback with potential for serious injury. Router Speed and Feed Rate: Operate routers at manufacturer-recommended speeds for the bit diameter. Large diameter bits require slower speeds to prevent carbide tip damage and burning. Feed the work at a steady, controlled pace—too fast causes rough cuts and motor strain, whilst too slow burns the timber and overheats the bit. Bit Installation and Inspection: Ensure routers are disconnected from 240v mains power before changing bits. Insert shanks fully into the collet, then withdraw approximately 1-2mm before tightening to prevent bottoming out. Inspect bits before use for damaged carbide tips, bent shanks, or resin buildup which affects balance and cutting quality. Replace damaged bits immediately. Direction of Feed: Always feed work against the rotation direction of the bit. On router tables, this means feeding right to left when facing the fence. Feeding with the rotation (climb cutting) can cause violent bit grab and workpiece ejection. Follow HSE guidance on safe router operation in professional workshop environments. Frequently Asked Questions Can I use slotting bits in a cordless router? Whilst technically possible, most cordless routers lack sufficient power and sustained runtime for extended slotting work. Battery-powered routers typically deliver 18V performance suitable for light edge routing, but struggle with the continuous load of groove cutting. For production work or hardwoods, use a mains-powered 240v router with adequate wattage for consistent results and to avoid premature battery depletion or motor thermal shutdown. What's the difference between a slotting bit and a straight bit? Standard straight bits cut grooves with square corners and flat bottoms, suitable for general-purpose channels. Slotting bits are specifically engineered for particular applications: biscuit bits create the precise curved profile required for biscuit wafers, ball groovers produce decorative rounded channels, and weatherseal bits cut the narrow dimensions needed for door seals. Specialised bits deliver purpose-specific profiles that straight bits cannot replicate. How do I prevent burn marks when cutting grooves? Burning results from excessive friction caused by dull cutters, incorrect router speed, or slow feed rates. Ensure TCT bits are sharp and clean—remove pitch buildup with specialist resin remover. Reduce router speed if cutting large diameter bits, and maintain a steady feed rate without pausing. Multiple shallow passes generate less heat than attempting full depth in one cut. Sharp bits in properly maintained routers produce clean grooves without scorching. Do I need a router table for slotting and grooving work? A router table significantly improves accuracy and safety for repetitive slotting work, allowing precise fence positioning and stable workpiece support. However, many grooving applications—particularly weatherseal channels in door frames or decorative grooves in panels—are best performed with a handheld router guided by the workpiece edge or a straightedge. Assess each application individually, prioritising the setup that offers greatest control and safety. Can slotting bits be sharpened when they become dull? TCT router bits can be professionally resharpened by specialist tool grinding services, extending their service life considerably. However, the cost of sharpening versus replacement depends on the bit's original quality and complexity. Premium Trend bits justify resharpening costs, whilst budget bits may prove uneconomical to refurbish. DIY sharpening risks altering cutting geometry and creating dangerous imbalances—always use professional services with precision grinding equipment calibrated for router bit specifications.

## Products

- [Trend CRAFTPRO One Piece Slotting Router Cutter](https://www.tooled-up.com/trend-craftpro-one-piece-slotting-router-cutter/prod/248418/) - from £30.95
- [Trend Threaded Slotter Blade for 33 Series M12 Arbors](https://www.tooled-up.com/trend-threaded-slotter-blade-for-33-series-m12-arbors/prod/261223/) - from £86.95
- [Trend Slotter Blade for 1/4 Bore Arbor](https://www.tooled-up.com/trend-slotter-blade-for-1-4-bore-arbor/prod/256983/) - from £33.95
- [Trend CRAFTPRO Weatherseal Groover Router Cutter](https://www.tooled-up.com/trend-craftpro-weatherseal-groover-router-cutter/prod/234957/) - from £53.95
- [Draper 1/2" Biscuit No. 10 Tct Router Bit](https://www.tooled-up.com/draper-1-2-biscuit-no-10-tct-router-bit/prod/133618/) - £20.95
- [Draper 1/2" Biscuit No. 20 Tct Router Bit](https://www.tooled-up.com/draper-1-2-biscuit-no-20-tct-router-bit/prod/133669/) - £24.95
- [Trend Tongue and Groove Set](https://www.tooled-up.com/trend-tongue-and-groove-set/prod/241608/) - £107.95
- [Trend Ball Groover 1/2" Shank Router Cutter](https://www.tooled-up.com/trend-ball-groover-1-2-shank-router-cutter/prod/239361/) - £63.95
- [Draper 1/4" Biscuit No. 20 Tct Router Bit](https://www.tooled-up.com/draper-1-4-biscuit-no-20-tct-router-bit/prod/133667/) - £24.95
- [Trend Arbor for 12Mm Bore Groover Blades](https://www.tooled-up.com/trend-arbor-for-12mm-bore-groover-blades/prod/221228/) - £35.95
- [Trend Slotter Blade for 12MM Bore 33/1 Arbor](https://www.tooled-up.com/trend-slotter-blade-for-12mm-bore-33-1-arbor/prod/238129/) - from £79.95
- [Trend Quad Groover Blade](https://www.tooled-up.com/trend-quad-groover-blade/prod/228070/) - £36.95
- [Trend 33/22X1/2 Threaded Arbor for M12 Bore Groover Blades](https://www.tooled-up.com/trend-33-22x1-2-threaded-arbor-for-m12-bore-groover-blades/prod/267664/) - £20.95

---
**URL**: https://www.tooled-up.com/slotting-grooving-bits/cat/10001245/
