Tenon Saws

Sorry, there are currently no items available in this category. We are currently working to bring you this range of products so please check back again soon.

In the meantime please browse our website using one of the links below :

Browsing Suggestions

If you still can't find what you are looking for try browsing by category using the Browse Tools link at the top of the page.

Tenon Saw

Tenon Saws Information

The Tenon Saw gets its name from the tenon in a mortice & tenon joint, the cutting of which its one of its primary specialities. However, the average woodworker is perhaps most likely to use one in combination with a mitre box or mitre block, in order to obtain precise 90° or 45° cuts. Equipped with a fine toothed blade designed for clean cutting, the tenon saw also benefits from a stiffening rib which runs along the top of the tool and prevents it from wobbling during use.

Here's our Quick Application Guide:

• Length - an important consideration, depending on the size of the material you are cutting. However, most tenon saws are generally manufactured around the 300mm mark.
• TPI - TPI stands for Teeth Per Inch. Saws with a low TPI value will cut quickly but coarsely, while saws with a higher TPI count will cut slowly but produce finer cuts. Tenon saws usually start at around 10TPI which is generally considered a fine cut, and anything over this can be expected to give progressively cleaner results.

^ Top