# Trend Snappy Accessories

**Category Path**: Power Tool Accessories > Trend Snappy Accessories

Shop Trend Snappy Accessories at Tooled-Up. Browse drill bits, countersinks, screwdriver bits, hole cutters and adaptors. Fast UK delivery. Expert advice.

About Trend Snappy Accessories The Trend Snappy system represents a comprehensive solution for professionals and DIY enthusiasts who demand quick, efficient bit changes without compromising on grip strength or accuracy. Trend Snappy Accessories are built around a clever quick-change system featuring 1/4" hex drive shanks that work seamlessly with dedicated quick-change chucks like the Snappy Quick Chuck, standard drill chucks, and hex chucks found on modern cordless drivers and drills. This versatility makes them an essential addition to any toolkit where time and efficiency matter. What sets the Snappy system apart is its dual functionality. When used with a Snappy Quick Chuck, accessories lock securely during use but can be ejected and swapped in seconds with a simple push mechanism - eliminating the frustration of fumbling with traditional chucks mid-job. However, the 1/4" hex shank design means these accessories aren't locked into a proprietary system; they can be mounted directly into standard drill chucks or hex drives when needed. Tooled-Up.com stocks the complete range of Snappy accessories, from precision drill bits and screwdriver bits to countersinks, hole saws, forstners, nut drivers, and specialised accessories like step drills and deburring tools. The Snappy range covers virtually every common drilling and driving task encountered on site or in the workshop. Whether you're drilling pilot holes, driving screws, cutting precise holes for pipe work, or deburring edges for a professional finish, there's a Snappy accessory designed for the job. The system is particularly valuable for trades that require frequent bit changes throughout the working day, where the time saved on each change adds up to significant productivity gains over weeks and months of use. Jargon Buster Quick Change Chuck: A specialised chuck system that allows drill bits and driver bits to be inserted and removed rapidly without manual tightening. The Trend Snappy Quick Chuck uses a push-release mechanism for instant bit ejection. 1/4" Hex Shank: A six-sided drive shank measuring 1/4 inch across the flats, which has become the industry standard for quick-change systems. The hexagonal shape prevents the bit from spinning in the chuck under load. Forstner Bit: A precision drilling bit designed to cut flat-bottomed holes with clean sides, commonly used for concealed hinges, dowel holes, and decorative work in wood. Countersink: A conical cutting tool used to create a tapered recess that allows screw heads to sit flush with or below the material surface, essential for professional-looking installations. Step Drill: A conical drill bit with multiple stepped diameters, allowing you to drill various hole sizes with a single bit - particularly useful for sheet materials and deburring. Deburring Tool: A cutting accessory designed to remove sharp edges and burrs left after drilling or cutting, creating smooth, safe edges on metal, plastic, or wood. Who Uses Trend Snappy Accessories? The Trend Snappy system appeals to a broad range of users who value efficiency and versatility: Joiners and Carpenters: For rapid switching between drilling pilot holes and driving screws during first and second fix work Kitchen and Bathroom Fitters: Who need various hole saws, forstners, and drill bits for pipework, hinges, and fixtures Electricians: Requiring quick changes between drill bits for cable holes and driver bits for fixing accessories Plumbers: Using step drills and hole cutters for pipe penetrations and fixture installations Shopfitters and Shopfitters: Working with diverse materials requiring frequent accessory changes Maintenance Engineers: Who carry a compact set of accessories for varied repair and installation tasks DIY Enthusiasts: Undertaking home improvement projects where tool versatility and ease of use are priorities Furniture Makers: Utilising forstner bits and countersinks for professional joinery and hardware installation How to Choose the Right Trend Snappy Accessories Selecting appropriate Snappy accessories depends on your specific applications and working methods: Material Compatibility: Ensure the accessories you choose are rated for the materials you work with most frequently. Drill bits designed for wood won't perform well in metal, whilst HSS bits excel in metal but may be overkill for softwood. Check product specifications for intended materials. Size Requirements: Consider the range of hole sizes and fastener types you encounter regularly. Step drills offer multiple sizes in one tool, whilst individual bits provide precision for frequently-used sizes. For installation work, purchasing commonly-used sizes as individual bits alongside step drills for occasional sizes often proves most practical. Chuck Compatibility: Whilst all Snappy accessories work in standard chucks, you'll gain maximum benefit from investing in at least one Snappy Quick Chuck. Many tradespeople find having quick chucks in multiple drills or drivers eliminates chuck changes entirely - one tool for drilling, another for driving. Bit Quality and Longevity: The Snappy range from Tooled-Up includes various grades suited to different usage levels. Professional users drilling dozens of holes daily benefit from premium HSS or carbide-tipped options, whilst occasional users find standard HSS perfectly adequate. Storage and Organisation: Snappy Tool Holders and Kit Boxes keep accessories organised and protected. For mobile tradespeople, dedicated storage prevents loss and damage whilst ensuring you have the right bit to hand when needed. Power Tool Compatibility: Most Snappy accessories are designed for standard drilling and driving modes. Unless specifically stated, avoid using them with impact drivers in impact mode, as the hammering action can damage both the accessory and the quick-change mechanism. Popular Accessories Snappy Quick Chucks: The foundation of the system - essential for realising the full quick-change benefits Snappy Screwdriver Bit Sets: Comprehensive sets covering PZ, PH, Torx, and slotted drive types for everyday fastening Snappy HSS Drill Bit Sets: Complete ranges of twist drills in commonly-used sizes for wood and metal Magnetic Nut Drivers: Time-saving accessories for assembling fixtures, furniture, and mechanical components Countersink Bit Sets: For professional screw installation with flush or countersunk finishes Snappy Forstner Bits: Essential for concealed hinge installation and precision flat-bottomed holes Step Drill Bits: Versatile accessories for sheet materials and multiple hole sizes from one bit Drill Bit Guides: Accessories ensuring perpendicular holes without dedicated drill stands 6mm Adaptors: For connecting other accessory types to the Snappy system Tool Holders and Storage Boxes: Keeping your Snappy collection organised and protected Safety Information Working safely with Trend Snappy Accessories requires attention to several key areas: Eye Protection: Always wear appropriate safety glasses or goggles when drilling or driving. Swarf, splinters, and broken drill bits can cause serious eye injuries. This applies equally in workshops and on site. Secure Workpieces: Ensure materials are properly clamped or secured before drilling. Hand-holding workpieces can result in spinning materials causing injury if the bit binds or breaks through suddenly. Correct Chuck Engagement: Whether using quick-change chucks or standard chucks, ensure accessories are fully seated and secured. Insufficient engagement can result in bits slipping or ejecting during use. Speed Selection: Use appropriate drill speeds for the material and accessory size. Larger diameter bits and hole saws require slower speeds than small twist drills. Excessive speed generates heat, reducing tool life and potentially causing breakage. Impact Mode Limitations: Unless specifically stated as impact-rated, do not use Snappy accessories with impact drivers in impact mode. The hammering action can damage the hex shank and quick-change mechanisms. Electrical Safety: When using 240v corded drills, ensure tools are PAT tested regularly, leads are in good condition, and RCD protection is in place, particularly for site work. Battery-powered tools eliminate electrical risks but require charged batteries to prevent rushing and mistakes. Material Awareness: Check for hidden cables, pipes, and fixings before drilling into walls, floors, or ceilings. Cable and pipe detectors are essential site tools. Following HSE guidance on hidden services prevents potentially fatal accidents. Frequently Asked Questions Can I use Trend Snappy accessories without a Quick Chuck? Yes, absolutely. All Snappy accessories feature standard 1/4" hex shanks that fit directly into traditional drill chucks and hex chucks found on modern cordless drivers. The Quick Chuck system provides convenience and speed, but isn't mandatory for using the accessories themselves. Are Snappy accessories compatible with impact drivers? Snappy accessories can be fitted to impact drivers, but unless specifically stated as impact-rated, they should only be used in standard drilling or driving modes, not with the impact function engaged. The hammering action of impact mode can damage the accessories and reduce the effectiveness of quick-change systems. What's the advantage of the hex shank over round shanks? The hexagonal shape prevents the accessory from spinning in the chuck under load, providing superior grip compared to round shanks in similar quick-change systems. This means more torque transfer and less slippage during demanding applications like hole sawing or driving long screws. How do I maintain Snappy accessories for longest life? Keep drill bits sharp through regular sharpening or timely replacement, as blunt bits require excessive pressure that causes premature wear. Clean accessories after use, particularly when working with resinous woods or cutting fluids. Store in dedicated holders or cases to prevent damage to cutting edges and hex shanks. Apply occasional light oil to prevent rust on steel components. Can I use Snappy drill bits in a pillar drill or drill press? Yes, the 1/4" hex shank will fit in pillar drill chucks just like round-shank bits. However, you won't benefit from the quick-change features in this application. For dedicated machine use, traditional round-shank bits may offer better concentricity, though Snappy bits will certainly function adequately for general work.

## Products

- [Trend Snappy 5 Piece Drill Countersink Set for Wood Screws](https://www.tooled-up.com/trend-snappy-5-piece-drill-countersink-set-for-wood-screws/prod/247046/) - £44.95
- [Trend Snappy Drill Countersink for Wood Screws](https://www.tooled-up.com/trend-snappy-drill-countersink-for-wood-screws/prod/256168/) - £11.95
- [Trend Snappy TCT Drill Countersinks](https://www.tooled-up.com/trend-snappy-tct-drill-countersinks/prod/235378/) - £19.95
- [Trend Snappy Kitchen Hinge Cutter](https://www.tooled-up.com/trend-snappy-kitchen-hinge-cutter/prod/258437/) - from £26.95
- [Trend Snappy Magnetic Nut Driver](https://www.tooled-up.com/trend-snappy-magnetic-nut-driver/prod/226062/) - from £13.95
- [Trend Snappy Drill Centring Guide](https://www.tooled-up.com/trend-snappy-drill-centring-guide/prod/236251/) - from £15.95
- [Trend Snappy Socket Adaptors](https://www.tooled-up.com/trend-snappy-socket-adaptors/prod/229697/) - from £11.95
- [Trend Snappy 35mm TCT Hinge Cutter With Depth Stop](https://www.tooled-up.com/trend-snappy-35mm-tct-hinge-cutter-with-depth-stop/prod/307656/) - £36.95
- [Trend Snappy 3 Piece Square Robertson Screwdriver Bit Set](https://www.tooled-up.com/trend-snappy-3-piece-square-robertson-screwdriver-bit-set/prod/269444/) - £8.95
- [Trend Snappy TCT Glass Drill Bit](https://www.tooled-up.com/trend-snappy-tct-glass-drill-bit/prod/238360/) - from £6.99
- [Trend Snappy 5 Piece Drill Bit Guide](https://www.tooled-up.com/trend-snappy-5-piece-drill-bit-guide/prod/224956/) - £45.95
- [Trend Snappy Long Series Phillips Screwdriver Bit](https://www.tooled-up.com/trend-snappy-long-series-phillips-screwdriver-bit/prod/222158/) - £11.95
- [Trend Snappy Wood Plug Cutter](https://www.tooled-up.com/trend-snappy-wood-plug-cutter/prod/221935/) - from £19.95
- [Trend Snappy Quick Chuck](https://www.tooled-up.com/trend-snappy-quick-chuck/prod/263864/) - £19.95
- [Trend Snappy Magnetic Holder Screw Bit Holder](https://www.tooled-up.com/trend-snappy-magnetic-holder-screw-bit-holder/prod/271592/) - £17.95
- [Trend Snappy TCT Drill Countersink for Wood Screws](https://www.tooled-up.com/trend-snappy-tct-drill-countersink-for-wood-screws/prod/243953/) - from £21.95
- [Trend 3 Piece Quick Release Drill Bit Guide Set](https://www.tooled-up.com/trend-3-piece-quick-release-drill-bit-guide-set/prod/544151/) - £22.95
- [Trend 5 Piece Quick Release Countersink Set](https://www.tooled-up.com/trend-5-piece-quick-release-countersink-set/prod/559900/) - £26.95
- [Trend 60 Piece Snappy Tool Holder and Bit Set](https://www.tooled-up.com/trend-60-piece-snappy-tool-holder-and-bit-set/prod/230772/) - £154.95
- [Trend Snappy TCT Counterbore Drill Bit](https://www.tooled-up.com/trend-snappy-tct-counterbore-drill-bit/prod/231781/) - from £29.95
- [Trend Snappy Tube Plug Cutter](https://www.tooled-up.com/trend-snappy-tube-plug-cutter/prod/268852/) - from £27.95
- [Trend SNAPPY WS Drill Bit](https://www.tooled-up.com/trend-snappy-ws-drill-bit/prod/262245/) - from £18.95
- [Trend 30 Piece Snappy Tool Holder Empty](https://www.tooled-up.com/trend-30-piece-snappy-tool-holder-empty/prod/234530/) - £17.95
- [Trend Snappy 5 Piece Hex Shank Masonry Drill Bit Set](https://www.tooled-up.com/trend-snappy-5-piece-hex-shank-masonry-drill-bit-set/prod/234526/) - £29.95
- [Trend Snappy 5 Piece TCT Drill Countersink for Wood Screws](https://www.tooled-up.com/trend-snappy-5-piece-tct-drill-countersink-for-wood-screws/prod/270789/) - £93.95
- [Trend Snappy TCT Drill Countersinks and Depth Stop](https://www.tooled-up.com/trend-snappy-tct-drill-countersinks-and-depth-stop/prod/231418/) - £34.95
- [Trend SNAPPY HSS Metric Drill Bit](https://www.tooled-up.com/trend-snappy-hss-metric-drill-bit/prod/244371/) - £5.49
- [Trend Snappy Wood Auger Bit](https://www.tooled-up.com/trend-snappy-wood-auger-bit/prod/269189/) - from £11.95
- [Trend Snappy 3 Piece Drill Bit Guide Set](https://www.tooled-up.com/trend-snappy-3-piece-drill-bit-guide-set/prod/233016/) - £61.95
- [Trend Snappy 82 Deg Countersink](https://www.tooled-up.com/trend-snappy-82-deg-countersink/prod/241367/) - £19.95
- [Trend Snappy Long Series Pozi Screwdriver Bits](https://www.tooled-up.com/trend-snappy-long-series-pozi-screwdriver-bits/prod/251364/) - £11.95
- [Trend Snappy Forstner Drill Bit](https://www.tooled-up.com/trend-snappy-forstner-drill-bit/prod/264195/) - from £19.95
- [Trend SNAPPY HSS Drill bit](https://www.tooled-up.com/trend-snappy-hss-drill-bit/prod/241675/) - £2.95
- [Trend Snappy Magnetic Bit Holder and Pozi Bit](https://www.tooled-up.com/trend-snappy-magnetic-bit-holder-and-pozi-bit/prod/225315/) - £8.95
- [Trend Snappy TCT Metric Screw Countersink and Depth Stop](https://www.tooled-up.com/trend-snappy-tct-metric-screw-countersink-and-depth-stop/prod/272826/) - from £30.95
- [Trend 16 Piece Snappy Hex Drill Bit Set](https://www.tooled-up.com/trend-16-piece-snappy-hex-drill-bit-set/prod/250901/) - £37.95

*Showing 36 of 47 products (page 1 of 2)*

---
**URL**: https://www.tooled-up.com/trend-snappy-accessories/cat/100261/
