# Water & Gas Test Gauges

**Category Path**: Plumbing Tools > Water & Gas Test Gauges

Shop water & gas test gauges at Tooled-Up. Professional pressure testing equipment for plumbers and gas engineers. Fast UK delivery. Expert advice available.

About Water & Gas Test Gauges Water and gas test gauges are essential diagnostic instruments used to measure, monitor and verify the pressure and integrity of water supply systems and gas installations. These precision tools enable tradespeople to conduct thorough safety checks, identify leaks, test for pressure drops, and ensure installations comply with current UK building regulations and Gas Safe requirements. Whether testing domestic boiler installations, commercial gas pipework, or water supply networks, accurate pressure measurement is fundamental to safe and compliant work. The selection at Tooled-Up.com includes both dedicated gas test gauges and water test gauges, each designed for their specific application. Gas test gauges typically measure in millibars (mbar) and are calibrated to detect the low pressures found in domestic and commercial gas systems, whilst water test gauges measure higher pressures in bars or PSI to assess mains water supply, central heating systems, and plumbing installations. Modern digital gauges offer enhanced accuracy and data logging capabilities, whilst traditional analogue gauges remain popular for their reliability and ease of use without battery dependency. Professional-grade test gauges feature robust construction to withstand the demands of site work, with protective rubber boots, quality brass fittings, and clear, easy-to-read dials or digital displays. Many models include multiple pressure scales, adjustable needle indicators for recording maximum pressure readings, and quick-connect fittings compatible with standard test points. Proper calibration and regular servicing of these instruments is crucial, as accurate pressure measurement directly impacts safety certification and regulatory compliance. Jargon Buster Working Pressure: The normal operating pressure of a gas or water system, measured in millibars (mbar) for gas or bars/PSI for water. Domestic gas typically operates at 21mbar, whilst mains water pressure ranges from 1-4 bar. Tightness Testing: A procedure used to verify that gas pipework has no leaks by pressurising the system and monitoring for pressure drop over a specified period, as required by Gas Safe regulations. Let-By Test: A diagnostic test performed on gas meter valves to ensure they shut off completely and don't allow gas to pass when closed, critical for isolation and safety procedures. Standing Pressure: The static pressure in a gas supply when no appliances are drawing gas, used as a baseline measurement before conducting flow rate tests. Pressure Drop: A reduction in system pressure that may indicate a leak, undersized pipework, or restriction in the system. Excessive pressure drop can affect appliance performance and safety. Manometer: An alternative term for a pressure gauge, particularly those using liquid column measurement, though now commonly applied to digital and analogue dial-type gauges used in gas and water testing. Who Uses Water & Gas Test Gauges? Gas Safe Registered Engineers: For mandatory pressure testing, leak detection, and certification of gas installations in domestic and commercial properties Plumbers and Heating Engineers: Testing water pressure in mains supplies, central heating systems, and unvented hot water cylinders Building Services Engineers: Commissioning and maintaining commercial heating, water supply, and gas distribution systems Facilities Maintenance Teams: Routine testing and monitoring of building services in commercial, industrial, and institutional properties Landlords and Property Managers: Conducting required safety checks and maintaining compliance with landlord gas safety certificates Water Treatment Specialists: Testing pressure in filtration systems, water softeners, and boosted water supplies Site Supervisors and Contractors: Verifying system pressures during construction, commissioning, and handover processes How to Choose the Right Water & Gas Test Gauges Application Type: Determine whether you need a gas test gauge (typically 0-100mbar range), a water test gauge (0-10 bar or higher), or both. Gas work legally requires Gas Safe registration, and gauges must meet regulatory standards for certification work. Water gauges need higher pressure ratings to safely test mains supplies and pressure systems. Accuracy and Calibration: Professional gauges should offer accuracy within ±1% for reliable diagnostics and compliance testing. Look for models that come with calibration certificates and can be recalibrated annually to maintain accuracy. Digital gauges often provide superior precision, whilst quality analogue gauges offer dependable accuracy without battery concerns. Measurement Range: Select a gauge with an appropriate range for your typical work. Gas testing generally requires 0-100mbar or 0-200mbar scales, whilst water testing might need 0-10 bar for domestic work or higher ranges for commercial applications. Dual-scale gauges showing both metric and imperial units can be useful for referencing older specifications. Digital vs Analogue: Digital gauges available from Tooled-Up offer features like data logging, backlit displays, maximum pressure hold, and multiple unit conversions. They're ideal for detailed diagnostics and record-keeping. Analogue gauges provide instant visual feedback, work in any environment without batteries, and many tradespeople prefer their reliability for routine testing. Build Quality and Durability: Choose gauges with robust metal cases, protective rubber boots, and quality brass or stainless steel pressure connections. The gauge should withstand drops, temperature variations, and the general rigours of site work. Glycerin-filled analogue gauges resist vibration and provide smoother needle movement for easier reading. Fittings and Connections: Verify that test hoses and adaptors are compatible with UK standard test points and appliance connections. Quick-connect fittings save time, whilst universal kits with multiple adaptors provide versatility across different installation types. Look for sets that include necessary test nipples, hoses, and carry cases. Popular Accessories Test Hoses and Leads: High-pressure rated hoses in various lengths for connecting gauges to test points and appliances Adaptor and Fitting Kits: Universal connector sets for different appliance types, test nipples, and British Standard thread adaptors Manometer Fluid: Replacement fluid for liquid column manometers, with appropriate specific gravity for accurate gas pressure measurement Pressure Test Pumps: Hand pumps for pressurising systems during tightness testing, particularly useful for water systems Calibration Certificates: Annual recalibration services to maintain gauge accuracy and compliance with professional standards Protective Cases: Padded carry cases and blow-moulded storage boxes to protect gauges during transport and storage Isolation Valves and Test Points: Components for creating permanent test access points in installations for routine monitoring Leak Detection Fluid: Spray bottles of approved leak detection solution for visually confirming pressure test results Safety Information Gas Safe Regulations: In the UK, only Gas Safe registered engineers are legally permitted to work on gas installations and appliances. Using gas test gauges as part of gas work requires appropriate training, registration, and insurance. Always ensure your Gas Safe registration is current and covers the types of gas work you undertake. Gauge Accuracy and Calibration: Using incorrectly calibrated or damaged gauges can lead to dangerous misdiagnosis of system faults or leaks. Have gauges professionally calibrated annually and immediately replace or repair any gauge that has been dropped, over-pressured, or shows signs of damage. Keep calibration certificates for audit and liability purposes. Pressure System Safety: Never exceed the maximum rated pressure of a gauge, as this can cause permanent damage to the mechanism and lead to inaccurate readings. When testing water systems, be aware of potential pressure surges and always use gauges rated above the maximum expected system pressure. Wear appropriate PPE including safety glasses when pressurising systems. Leak Testing Procedures: Follow manufacturer guidelines and regulatory requirements for tightness test durations and acceptable pressure drop values. Never use inappropriate methods to pressurise gas systems, and ensure adequate ventilation when working with gas installations. Always complete visual inspections and use approved leak detection methods to supplement pressure testing. Frequently Asked Questions What pressure should my domestic gas supply show? UK domestic gas supplies should typically show a standing pressure of approximately 21mbar (±2mbar). When appliances are operating, working pressure should remain above 17mbar. Pressures outside these ranges may indicate supply problems or metering issues requiring investigation by the gas supplier or a Gas Safe engineer. How often should test gauges be calibrated? Professional test gauges used for certification work should be calibrated annually by an accredited laboratory. More frequent calibration may be necessary for gauges used intensively or in demanding environments. Always recalibrate after a gauge has been dropped or subjected to over-pressure, as this can affect accuracy even without visible damage. Can I use the same gauge for both gas and water testing? No, gas and water test gauges are designed for different pressure ranges and should not be interchanged. Gas gauges typically measure up to 100-200mbar and provide the precision needed for low-pressure gas work, whilst water gauges measure much higher pressures (typically 0-10 bar or more). Using the wrong type of gauge will provide inaccurate and potentially dangerous readings. What's the acceptable pressure drop during a tightness test? For domestic gas installations up to 35mm pipe, current UK regulations specify a maximum pressure drop of 4mbar over 2 minutes (using a u-gauge) or 8mbar over 1 minute at an initial test pressure of 20mbar. Different criteria apply to larger installations. Always consult current Gas Safe technical standards for specific requirements, as acceptable values vary by system volume and test method. Do digital gauges need special maintenance? Digital gauges require battery replacement and should be stored in moderate temperatures to preserve battery life and electronic components. Protect them from moisture, extreme temperatures, and physical impacts. Unlike analogue gauges, digital models may need firmware updates and can be more susceptible to electronic failure, so having a backup analogue gauge is sensible for essential diagnostic work.

## Products

- [Monument Gas Test Gauge](https://www.tooled-up.com/monument-gas-test-gauge/prod/6628/) - from £31.95
- [Ridgid Micro CD-100 Gas Detector](https://www.tooled-up.com/ridgid-micro-cd-100-gas-detector/prod/201791/) - £137.95
- [Monument Pipe Dry Testing Kit](https://www.tooled-up.com/monument-pipe-dry-testing-kit/prod/145126/) - £54.95
- [Arctic Hayes U Flow Water Gauge](https://www.tooled-up.com/arctic-hayes-u-flow-water-gauge/prod/492566/) - £28.95
- [Monument 174Z Air Testing 'U' Gauge Kit](https://www.tooled-up.com/monument-174z-air-testing-u-gauge-kit/prod/6590/) - £61.95
- [Monument 1515U Water Flow Weir Gauge](https://www.tooled-up.com/monument-1515u-water-flow-weir-gauge/prod/240624/) - £42.95
- [Monument 1729T Black Rubber Hose for U Gauges](https://www.tooled-up.com/monument-1729t-black-rubber-hose-for-u-gauges/prod/206717/) - £11.95
- [Monument 183B Tee Piece for U Gauge](https://www.tooled-up.com/monument-183b-tee-piece-for-u-gauge/prod/6595/) - £3.49
- [Monument 1279Y Spare Hose for Gas Testing Equipment](https://www.tooled-up.com/monument-1279y-spare-hose-for-gas-testing-equipment/prod/6568/) - £8.95
- [Monument 175C U Gauge or Manometer](https://www.tooled-up.com/monument-175c-u-gauge-or-manometer/prod/6591/) - £17.95
- [Monument 1730X Orange Hose for Gas Test Gauges](https://www.tooled-up.com/monument-1730x-orange-hose-for-gas-test-gauges/prod/250838/) - £19.95
- [Monument 1277S Spare Hose for Gas Testing Equipment](https://www.tooled-up.com/monument-1277s-spare-hose-for-gas-testing-equipment/prod/6567/) - £5.95

---
**URL**: https://www.tooled-up.com/water-gas-test-gauges/cat/100182/
