Advanced Search | Shop by Brand
Leave a review
Fiskars UP53 Universal Anvil Tree Pruner & Cutter 1.6 Metre LongFiskars Universal Garden Cutter is a multi-use tool with excellent accessibility to tree crowns and dense bushes. Trim overhead without a ladder or at ground level without bending or kneeling. Activate the great cutting power with a mere slide of the orange handle or when used at maximum height, pull the orange end knob. When you need to reach higher branches, try the telescopic version. The adjustable head and the light cutting mechanism ensures fast, easy and safe pruning. Features:- Long reach shaft makes hard to reach garden tasks accessible from a safe standing position- Extremely efficient PowerReel mechanism makes cutting 12 times easier compared to standard mechanisms- Adjustable cutting angle up to 26º- Anvil cutting action for cutting dry and hard woodSpecifications:Max. cutting width - 32mmMax length - 1.6 metresCutting head - AnvilWeight - 780g
Read all 5 customer reviews...
Graham mortimer | 04 November 2014
Not robust enough, can cut very well but easy to get the blade jammed and difficult to release. Happened to many times now and blade will not work. Have taken it apart and cannot put it back together in a good working order
have to scrap it so now looking for another make.
Victor jones | 09 April 2014
I have the same problem as maurice, cord snapped cutter end. I have taken it apart by undoing the 2 nuts and bolts, and taken out the pin from the end of the blade to enable the rod with the pulley on the end to be extracted, also take the spring off the other end of the blade. Rethread with new cord and then put it back in reverse of above.
only problem i have is getting the cord ,any ideas.
Maurice rolfe | 26 November 2013
Only had these less than a year and already the nylon rope has snapped. It maybe my fault for trying to cut and slightly thicker branch but not sure. Any the problem now is that there is no information on how to replace/rethread the rope back onto the spool etc as it has snapped on the pulley that is on the end of the cutting arm. If anyone has had simular problems and found an answer please post on here. Thanks.
You may need Adobe Reader to view some of our downloads.
If you do not already have it installed please click the icon to the left to install
If you require more information or assistance with this product please consult the links below :
If you have a bulk order for this item then we may be able to offer you an extra discount. Please call our order line on 0844 335 3902 for a quote.
Please note : to qualify for a bulk discount where not already specified on the website, a bulk order would be considered to be normally a minimum of around 100 units for lower value items, and sometimes less if it is high value item.
Tooled-Up.com78 Suez RoadBrimsdownEnfieldMiddlesexEN3 7PSTel : 0844 335 3902