Advanced Search | Shop by Brand
View 4 more images...
Leave a review
Black & Decker WM825 Plus Dual Height Workmate DeluxeFeatures & Benefits:• Exclusive, advanced one-handed clamp system allows clamps to be adjusted together or independently• Front jaw swings up for vertical clamping, increasing flexibility to clamp odd-shaped objects• Dual working heights allows use as a workbench, bench tool stand, vice, or sawhorse• Heavyweight steel construction allows support of 250kg• Folding frame for compact storage and easy transport• Dual clamping cranks increase clamping force and versatility• Adjustable swivel pegs and jaw retention grooves provide clamping versatility and reliable material hold• Designed for easy set-up and clean-up• Rubber feet are anti-slip• 3 vice jaw positions for versatilityApplications:Holds virtually anythingBench tool standVice for cutting, painting, etc.WorkbenchSawhorseSpecifications:Working heights: 800/620 mmFolded size (W x H x D): 830 x 740 x 200 mmVice jaw opening: 0-205 mmVice jaw length: 740 mmMax table width - Jaws open: 541 mmVice jaw positions: 3Maximum load: 250 kgVice jaw material: Particle boardIncludes:Four vice pegs
Showing 1 to 20 of 36 reviews
Page 1 2 next>>
Chris | 11 November 2014
Ordered this item from tooled-up and it was delivered the following day. Excellent service. Have not yet used the workbench -the only negative was on the build instruction - could have been clearer but otherwise ok so far. Have had a b&d bench for years but have a permanent saw mounted on it now . If the new one lasts as long as my present one i will be delighted.
Was this review helpful to you? Yes | No
Andy brasted | 14 October 2014
Perfect for occasional diy
Michael | 01 August 2014
Disappointed. Quality was poor: bent metal part (box was fine, so it was damaged before packing). The two wooden (bamboo)work-tops did not meet flush
so-so stability. Not recommended.
Was this review helpful to you? Yes | No
(1 of 1 people found this useful)
David watson | 23 July 2014
Never mind the build quality, feel black & decker's profit! sadly, i have seen the build quality of the workmate decline over the last 45 years. the one i bought my dad in 1970 had hardwood decks! on my new one, the bamboo(!) was damaged out of the box. since it couldn't have happened in transit (within a cardboard sleeve within the box) what does that say about quality control?
good on features, awful assembly instructions, dreadful build quality. my advice? buy german! (i'll bet this doesn't get published - all part of the problem!)
Yvonne dickinson | 14 July 2014
This was excellent value for money.
Kevan davey | 14 July 2014
Still a good piece of kit but not as sturdy as the previous one i had. It gives great versatility, is easy to store and transport as it folds down neatly. As has been said before i had to refit the front bar and its springs. The assembly instructions could be better but take your time and it will come together okay. The ordering process from tooled-up was fine and delivery was prompt.
Don | 11 July 2014
The product was delivered on time as promised by tooled up .When i removed it from the box the front bar that lifts the front to a vertical position came off and i had to re-attach it and fit the springs. During this process i cut my finger on a sharp edge of the frame. The assembly instructions are very poor. I used the the exploded drawing to assemble it. I have not used it a great deal but it seems ok so far.
Mike | 16 June 2014
Loved the service provided by tooled up.Com.... However, bought this product to use, does not come assembled and instructions supplied do not cover this appliance. On assembly i sliced my finger on the chassis as it was not de-burred or badly pressed. I wrote and complained to black and decker who arranged eventually for it to be collected, two days after they had said they would. I received a call from customer service who promptly said " nothing wrong with it" despite the photos and a very clear explanation their customer service refused to acknowledge there is a fault. Product quality poor. Instructions for assembly poor. Customer service very disappointing. Anyone wishing to inspect this can gladly come and inspect.
Andrew murphy | 28 April 2014
This is an additional product to the basic workmate, to be perfectly honest i do not feel the extra cost is justified by its performance. If i had the choice again i would have saved money and bought another basic model.
delivery from tooled up was ok, a little messed up due to stock levels but still recieved a timely response.
Clive birtles | 26 March 2014
This is absolute crap!
wish i had not bought it.
belt that connects 2 handles came off in under 1 minute and i can't get it back on.
quality crap. Handles loose and wobbly.
general movement is crap.
jaws don't line up.
never buy b&d!
returning this will be a nightmare to dessemble and repack.
Lesley jones | 05 February 2014
Very happy with service & delivery. But a little dissappointed as slight dent in one of the wooden tops, as dent in packageing. Husband too impatient to use so not complained. But maybe a replacement piece would be appreciated.
other than that very good communication.
Miskindoc | 09 January 2014
Had a workmate for 39yrs. Hope this one is as good, so far looking good!
Handy john | 31 December 2013
This was a replacement for an old workmate. more features and flexibility but the strength and build quality of the original is gone. The wide jaw feature is very welcome. Bizarre self assembly which must have a minimal saving on packaging. what is black and decker thinking? good service from tooled-up! thanks
Gill | 30 December 2013
Ordering very easy, kept up to date on delivery/days/times. actual delivery highly efficient company. Packaging very good. too early to say how good the workmate is going to be but so far happy with the product
Peter adcock | 24 December 2013
Delivered on time. Will determine reliability over the next months/years. The last one was a centre piece of my workshop since 1976.
Judith | 04 April 2013
As this was a gift, i am unable to comment in detail, but the person i sent it to said it seems fine.
i was particularly impressed with the speed and convenience of the delivery process, with a short time frame given when the item would arrive.
Jacqui gilfillan | 24 April 2012
The saying "they don't make things like they used to" is certainly true of this black and decker workmate.
i wanted a portable work bench and went for a black and decker model due to good past experiences with this make. from first handling this item it was obvious that the build quality has suffered over time. the previously solid feel has been replaced by a cheap, pressed steel work bench with a poor, lightweight feel. it was impossible to put the pins through the holes to secure the handles, so i resorted to buying nuts and bolts and securing them that way. i do sometimes wonder if the manufacturers ever try and assemble their own products.
i have not used the workmate to any great extent, but it seems to grip 2x1 timbers using the plastic grips with no problem, so i guess it will perform as required. hopefully it will hold together alright for the lightweight diy use it will be subjected to.
if it performs as stated in the description i will be satisfied, but i regret paying the extra for the black and decker name as it appears that is no longer a guarantee of quality.
Don smith | 28 March 2012
This is the top of the range workmate from b&d. It was bought to replace the 20 year old top of range b&d workmate when the dual height legs felloff.
a very poor replacement, when a piece of wood was clamped in the new workmate both the fixed and adjustable work surfaces angled upwards around the piece of work. You could not clamp the wood and use the workmate as a level platform.
the workmate was returned and tooled-up were brilliant in providing a full refund.
Peter reeve | 01 September 2011
This is the third one during my working life... Still the best on the market
nick moore | 25 May 2011
Good bit of kit a lot better than cheap ones good features too
Black & Decker WM825 Plus Dual Height Workmate Deluxe Video
If you require more information or assistance with this product please consult the links below :
If you have a bulk order for this item then we may be able to offer you an extra discount. Please call our order line on 0844 335 3902 for a quote.
Please note : to qualify for a bulk discount where not already specified on the website, a bulk order would be considered to be normally a minimum of around 100 units for lower value items, and sometimes less if it is high value item.
Tooled-Up.com78 Suez RoadBrimsdownEnfieldMiddlesexEN3 7PSTel : 0844 335 3902