Wera Engineering Tools

DeWalt FlexVolt Free 9Ah Battery Redemption
Choosing a sort option reloads the results in the new order.

Showing 3 results

Wera 844 Hex Shank Thread Tap

6 types from £9.95

in stock

Wera 847 Hex Shank Tapping Drill Bit

6 types from £14.95

available

Wera 1428 Kraftform Plus Reamer

£6.95

available

Choosing a sort option reloads the results in the new order.

Showing 3 results

Loading...

End of content

Error - No more pages to load

Wera Engineering Tools at Tooled-Up.com

Wera Engineering Tools cover precision thread-cutting and hole-finishing work, with child categories for Hand Reamers and Taps & Dies. These tools are made for workshop and maintenance jobs where accuracy matters: producing clean internal and external threads, and bringing drilled holes to an exact size and finish.

Tooled-Up.com stocks Wera Engineering Tools for engineers, fitters and maintenance professionals who need repeatable results. Taps and dies create or restore threads, while hand reamers finish holes to a close tolerance that a drill bit alone cannot achieve.

Browse the Wera selection to compare thread-cutting and reaming tools by job, so you can match the right tool to the material and the size of the work.

Key Features of Wera Engineering Tools

  • Precision-ground cutting edges: Taps and dies cut crisp, accurate threads, helping fasteners seat properly and reducing the risk of cross-threading.
  • Hardened tool steel construction: Resists wear when cutting, so tools hold their edge through repeated use in a busy workshop.
  • Hand reamer geometry: Straight or spiral flutes shave away a small amount of material, leaving a smooth, round, correctly sized hole.
  • Metric and imperial thread options: Choose the thread form that matches your fasteners, whether you are working on modern or older equipment.
  • Hand-operated use: Used with a tap wrench, die stock or reamer wrench, these tools give you control for delicate work, repairs and on-site jobs where a machine is not practical.

Who Uses Wera Engineering Tools?

Machinists, toolmakers and fabricators use taps, dies and reamers for producing bespoke components and finishing parts. Maintenance engineers rely on them to repair damaged threads on machinery, saving the cost of replacing a part.

Motor vehicle technicians, plant fitters and agricultural engineers also use them to clean up stripped bolts, studs and tapped holes. Keen DIY and workshop users find them useful for restoration projects, custom builds and one-off repairs.

Popular Wera Engineering Tools

Taps & Dies

Taps cut internal threads in drilled holes, and dies cut or restore external threads on bolts and rods. They suit new thread production as well as repair and re-cutting of damaged threads.

Hand Reamers

Hand reamers enlarge and finish existing holes to a precise diameter. They are ideal for dowel fits, bearing seats and any application where a hole must be accurate and smooth.

The Tooled-Up Wera range of engineering tools is available to browse by these two categories.

Frequently Asked Questions

What is the difference between a tap and a die?

A tap cuts a thread inside a hole, while a die cuts a thread on the outside of a bolt or rod. Use both to produce matching threaded parts.

When should I use a hand reamer instead of a drill bit?

Use a hand reamer after drilling when you need a precise hole size and a smoother finish. A drill bit removes bulk material, while a reamer refines the hole.

How do I get a clean thread when tapping?

Drill the correct tap-size hole, keep the tap square to the workpiece, and use cutting fluid. Turn the tap forward, then back off slightly to break the swarf.

Can taps and dies repair damaged threads?

Yes. Running the correct size tap or die through a slightly damaged thread can clean it up, provided the thread is not badly worn or stripped.

↑ TOP

Your Basket

£0.00 - 0 items