Sealey Hammer Faces

Free Black & Decker 2Ah Battery with 18V Tools
Choosing a sort option reloads the results in the new order.

Showing 18 results

Sealey Hard Nylon Face for NFH10 Hammer

£7.49

available

Sealey Copper Face for CFH02 and CRF15 Hammers

£13.95

available

Sealey Extra Hard Nylon Face for DBHN275 Hammer

£10.95

available

Sealey Hard Nylon Face for DBHN275 Hammer

£10.95

available

Sealey Rawhide Face for CRF15 Hammer

£14.95

available

Sealey Tough Nylon Face for DBHN275 Hammer

£10.95

available

Sealey Rawhide Face for CRF25 Hammer

£17.95

available

Sealey Copper Face for CFH03 and CRF25 Hammers

£19.95

available

Sealey Soft Nylon Face for NFH10 Hammer

£6.49

available

Sealey Copper Face for CFH04 and CRF35 Hammers

£24.95

available

Sealey Medium Nylon Face for DBHN275 Hammer

£9.95

available

Sealey Soft Nylon Face for DBHN275 Hammer

£11.95

available

Sealey Rawhide Face for CRF35 Hammer

£21.95

available

Choosing a sort option reloads the results in the new order.

Showing 18 results

Loading...

End of content

Error - No more pages to load

Sealey Hammer Faces at Tooled-Up.com

Sealey Hammer Faces are replacement striking faces that let you refresh a worn hammer rather than buy a new one. Tooled-Up.com stocks them in copper, rawhide and nylon, with each face matched to specific Sealey hammer models, including the CFH02, CFH03 and CFH04 copper-faced hammers, the CRF15, CRF25 and CRF35 rawhide-faced hammers, and the DBHN20, DBHN275, NFH175 and NFH10 nylon-faced hammers.

Each face is chosen for the job it does. Copper suits non-sparking, controlled striking. Rawhide gives a forgiving blow on delicate surfaces. Nylon comes in soft, medium, hard and extra hard grades, so you can match the face to the material you are working on.

Key Features of Sealey Hammer Faces

  • Model-specific fit: each face is made for named Sealey hammers, so it fits properly and strikes true. Always check the model number before ordering.
  • Copper faces: a softer, non-sparking surface that protects workpieces while still delivering firm impact.
  • Rawhide faces: a traditional, forgiving face that reduces marking on finished or delicate surfaces.
  • Graded nylon faces: soft, medium, hard and extra hard options let you balance impact force against surface protection.
  • Replaceable design: swapping a worn face extends the life of the hammer and keeps running costs down.

Who Uses Sealey Hammer Faces?

Vehicle mechanics and garage technicians use them for tapping components into place without scarring metal surfaces. Engineers and fabricators rely on copper and nylon faces for setting and aligning parts, while panel workers and restorers favour softer faces for finished surfaces. Workshop users and serious DIYers also benefit from keeping a few face types to hand for different tasks.

Harder nylon grades suit tougher assembly work, while soft nylon and rawhide suit delicate jobs where a mark would mean rework.

Popular Sealey Hammer Faces

Copper Faces

The Sealey Copper Face is available for CFH02 and CRF15, CFH03 and CRF25, and CFH04 and CRF35 hammers.

Rawhide Faces

Sealey Rawhide Faces are available for the CRF15, CRF25 and CRF35 hammers.

Nylon Faces

Soft, medium, hard and extra hard Sealey Nylon Faces cover the DBHN20 and NFH175 hammers and the DBHN275 hammer. A hard nylon face is also available for the NFH10 hammer. Browse the Sealey selection at Tooled-Up.com to find the right face for your hammer.

Frequently Asked Questions

How do I choose the right Sealey hammer face?

Start with your hammer's model number, then pick the material. Copper and rawhide suit controlled, surface-friendly striking, while nylon grades let you fine-tune hardness.

What is the difference between soft and extra hard nylon faces?

Soft nylon is gentler on the workpiece and is best for delicate surfaces. Extra hard nylon withstands heavier use and delivers more force but offers less cushioning.

Can I fit a face to any hammer?

No. Each Sealey face is made for specific models, such as the DBHN275 or CRF25, so check compatibility before buying.

Why choose a copper face?

Copper is softer than steel and non-sparking, so it protects workpieces while still giving a firm, controlled strike.

↑ TOP

Your Basket

£0.00 - 0 items