Everbuild Stick 2 Adhesive Thinner and Cleaner

The Everbuild brand is not only hugely popular with tradesmen and DIY'ers, it's quite literally huge - the biggest range in the business. In addition to core manufactured products the Everbuild range includes a wide range of ancillary items from sealant guns to dust sheets, line markers to masking tape.

The range of products Everbuild actually manufacture is extensive, from chemical blending for admixtures and waterproofers through water based sealant manufacturing to the highly advanced polymer engineering undertaken in manufacturing silicone and hybrid sealants, as well as adhesives and a wide range of powder products.

Everbuild STICK2® Contact Adhesive Thinner and Cleaner is a highly aggressive solvent, specially blended for both thinning All-Purpose Contact Adhesive and for cleaning up excess adhesive after application. Works on either wet or dry adhesive and is ideal for diluting contact adhesives for priming purposes, cleaning/removal of wet and dry contact adhesives and degreasing surfaces prior to application of contact adhesives.

Use Everbuild Contact Adhesive Thinner and Cleaner as a thinner, for priming purposes on heavily porous surfaces (e.g. MDF). Simply dilute 1-part contact adhesive to 6-parts thinners, then brush on surface and allow to dry.

As a cleaner, wear protective gloves and apply to a dirty rag then rub off unwanted adhesive or soak tools in this solution as required for cleaning grease, dirt etc.

Everbuild Contact Adhesive Thinner and Cleaner is also suitable for degreasing surfaces prior to applying contact adhesive for a clean bonding surface.

CAUTION: This product is very aggressive and may damage surrounding surfaces. Always test a small inconspicuous area before use for compatibility.