Einhell Chisel Bits

Einhell Chisel Bits at Tooled-Up.com

Einhell Chisel Bits are replacement cutting accessories for hammer drills, combi hammers and demolition hammers. They are used for breaking out concrete, chipping off render, lifting tiles and cutting chases in masonry. Tooled-Up.com organises the Einhell selection by shank type, so you can go straight to the fitting your machine uses: Hex Shank, SDS Max or SDS Plus.

Choosing the right shank matters more than any other spec. A bit that does not match the tool's chuck will not seat or transfer impact energy properly. Sorting the Einhell range by fitting makes it easier to pick a compatible bit and get on with the job.

Key Features of Einhell Chisel Bits

• Shank-specific fittings: Hex Shank, SDS Max and SDS Plus options cover everything from light chasing to heavy breaking, so you can match the bit to your machine.
• Built for repeated impact: Chisel bits take sustained hammering. Using the right bit for the material lets the tool's impact energy go into the work rather than being wasted.
• Different chisel profiles: Pointed, flat and wider-edged chisels suit different tasks, from breaking a starting point to levelling a surface. Check each product listing for the profile and working length.
• Suited to a range of tools: The SDS Plus, SDS Max and Hex Shank groupings cover lighter rotary hammers through to larger demolition tools.

Who Uses Einhell Chisel Bits?

• Builders and renovators breaking out concrete, removing render and opening up masonry.
• Electricians cutting chases for cable runs and back boxes in brick and block walls.
• Plumbers and heating engineers forming channels and notches for pipework.
• Tilers lifting old floor and wall tiles before re-tiling.
• Groundworkers and demolition crews breaking slabs and hard surfaces with heavier SDS Max and hex shank machines.
• DIY enthusiasts taking on patio, wall or floor removal with an SDS Plus rotary hammer.

Popular Einhell Chisel Bits

SDS Plus Chisel Bits

SDS Plus chisel bits are for lighter rotary hammers with a chiselling mode. They suit tile removal, chasing and general chipping work on walls and floors. They are a practical choice for electricians, tilers and home improvers.

SDS Max Chisel Bits

SDS Max chisel bits are for larger hammers where greater impact energy is needed. They suit heavier demolition and breaking out concrete, and are a common choice on renovation and groundwork jobs.

Hex Shank Chisel Bits

Hex Shank chisel bits fit breakers and demolition hammers with a hexagonal chuck. Browse the Einhell selection at Tooled-Up.com and match the hex fitting to your machine before ordering.

Frequently Asked Questions

How do I choose the right Einhell chisel bit?

Start with the shank type your tool takes: SDS Plus, SDS Max or hex. Then choose the profile that suits the task, such as a pointed bit for breaking or a flat bit for tile and surface removal.

Can I use SDS Plus bits in an SDS Max hammer?

No. The two fittings are different sizes and are not interchangeable. Check your tool's handbook or chuck markings before buying.

What is the difference between pointed and flat chisel bits?

A pointed bit concentrates force into a small area, which makes it good for breaking into concrete and masonry. A flat bit has a wider edge, which suits scraping, levelling and lifting tiles.

What safety equipment should I use with chisel bits?

Wear eye protection, gloves, hearing protection and a suitable dust mask, as recommended by the HSE. Follow COSHH guidance when breaking materials that may release harmful dust. Always check that the bit is properly seated, and replace any bit that is cracked or heavily worn. Shop Einhell Chisel Bits at Tooled-Up.com.