Monument Gas Test Gauges
Loading...
End of content
Error - No more pages to load
Monument Gas Test Gauges at Tooled-Up.com
Monument Gas Test Gauges are used by gas engineers and plumbers to check pipework for leaks and confirm pressure is holding. The Monument selection at Tooled-Up.com includes the Monument Gas Test Gauge, the 175C U Gauge or Manometer and the 174Z Air Testing 'U' Gauge Kit, plus the spare hoses and fittings that keep a test set working.
Replacement parts are covered too. The 1277S and 1279Y spare hoses, the 1729T Black Rubber Hose for U Gauges, the 1730X Orange Hose and the 183B Tee Piece for U Gauge let you refresh a worn setup without replacing the whole kit.
Key Features of Monument Gas Test Gauges
- U gauge and manometer design: the 175C gives a clear visual reading of pressure, so you can check a test result without relying on electronics or batteries.
- Complete air testing kit: the 174Z kit bundles what you need for air testing, so you can start work without sourcing parts separately.
- Replacement hoses: the 1277S is a 1m coiled black nitrile hose with a 7/32 inch (5.5mm) internal diameter. It suits standard gas testing equipment and helps maintain the integrity of your test.
- Rubber and coloured hose options: the 1729T black rubber hose and 1730X orange hose are made for U gauges and gas test gauges. The orange is easy to spot in a toolbag or under a sink.
- Tee piece: the 183B Tee Piece lets you connect a U gauge into your test setup.
Who Uses Monument Gas Test Gauges?
Gas Safe registered engineers use these gauges for tightness testing and pressure checks on domestic and commercial installations. Plumbers and heating engineers use them when installing boilers, hobs and new pipework, or after alterations. Maintenance teams and landlords' contractors rely on them for routine safety checks. Because hoses perish with use, spare hoses are a sensible item to keep in the van.
Frequently Asked Questions
Which Monument hose do I need for my gas test gauge?
Check the hose material, length and internal diameter against your existing equipment. The 1277S is a 1m coiled nitrile hose with a 5.5mm internal diameter, while the 1729T and 1730X are designed for U gauges and gas test gauges.
What is the difference between a U gauge and a gas test gauge?
A U gauge, or manometer, shows pressure visually using a liquid column. A gas test gauge gives a dial-style reading. Choose the one that matches how you test and the readings you need to record.
Can I replace parts rather than buy a new kit?
Yes. Hoses and the tee piece are available separately, so you can replace worn parts and keep using your existing gauge. Shop Monument Gas Test Gauges at Tooled-Up.com to find the right fit.
