Spear and Jackson Hose Adaptors & Connectors

Spear and Jackson Hose Adaptors & Connectors at Tooled-Up.com

Spear and Jackson Hose Adaptors & Connectors are the small fittings that join a garden hose to a tap, a spray gun, a sprinkler or another length of hose. Tooled-Up.com stocks them in three groups: end connectors, tap connectors, and O rings and washers. Together they cover the full connection, from the tap to the business end of the hose.

Each group does a different job. Tap connectors attach the hose to an outdoor or indoor tap. End connectors fit to the hose itself so that accessories can be clipped on or swapped quickly. O rings and washers are the sealing parts that stop weeping at the joints.

Choosing from one brand makes it easier to match fittings across a hose setup, and it helps you avoid leaks caused by mismatched parts.

Key Features of Spear and Jackson Hose Adaptors & Connectors

• Dedicated tap connectors: these grip the tap outlet securely, so the hose stays in place under mains pressure instead of popping off.
• End connectors for quick changes: you can move between a spray gun, a sprinkler and a nozzle without fiddling with the hose each time.
• Replaceable O rings and washers: a worn seal can be replaced in a minute, which is cheaper than replacing a whole fitting.
• Compatible parts within one brand: connectors, ends and seals are designed to work together, which helps give a tighter, drip-free fit.
• Practical, hard-wearing design: these fittings are made for repeated connecting and disconnecting outdoors.

Who Uses Spear and Jackson Hose Adaptors & Connectors?

Home gardeners are the obvious users, whether they are setting up a new hose, replacing a cracked fitting or adding a sprinkler. Landscapers and grounds maintenance teams use them to keep hoses working reliably on site visits.

Tradespeople such as builders, decorators and cleaners also find them useful for washing down tools, patios and vehicles, or for supplying water on site. Anyone fixing a dripping connection will find the O rings and washers a quick, low-cost repair.

Popular Spear and Jackson Hose Adaptors & Connectors

Tap Connectors

These are the first fitting for most hose setups. They link the hose to the tap and suit everyday watering and cleaning jobs.

End Connectors

End connectors let you attach spray guns, nozzles and other accessories, or join hose lengths together. They are a good choice if you change accessories often.

O Rings & Washers

These are the essential spares for stopping leaks. Keeping a few to hand means a dripping joint can be fixed straight away. Browse the Spear and Jackson selection at Tooled-Up.com to find the right fitting for your hose.

Frequently Asked Questions

How do I stop my hose connector leaking?

Check the O ring or washer first. If it is cracked, flattened or missing, replace it. Also make sure the connector is tightened fully and seated squarely on the tap or hose.

Which connector do I need to attach a hose to a tap?

Use a tap connector. Check the size of your tap outlet and hose before buying so the fitting matches both.

Can I use end connectors with different accessories?

Yes. End connectors are designed so you can swap between compatible accessories such as spray guns and sprinklers without changing the hose itself.

Are O rings and washers worth keeping as spares?

Yes. Seals wear with regular use and weather exposure, so spares let you fix leaks quickly. Shop Spear and Jackson Hose Adaptors & Connectors at Tooled-Up.com to stock up.