Oregon 95VPX 078E MICRO LITE Replacement Chainsaw Chain
click an image for more...
Share this product:
Follow Us:
FREE Click & Collect in store
Click & Collect your items FREE from our store in North London.
Returns
See more details about our clear no nonsense returns policy.
See All Oregon Here
Oregon 95VPX 078E MICRO LITE Replacement Chainsaw Chain
Oregon 95VPX Micro Lite chainsaw chains offer narrow kerf cutting, which requires less saw power than standard cutting systems
Features:
- Micro-Chisel cutters have small-radius working corners that cut fast and are easy to sharpen.
- Vibe-Ban chassis design reduces vibration 25% or more at the handles.
- Bumper drive links reduce kickback.
- Lubrilink tie straps help keep oil where it is needed-on the chain.
- Lubriwell oil holes in bumper drive links help carry oil around the full length of the guide bar’s groove.
- Recommended for saws from 35 to 55cc for bars from 13 to 18 (33 to 45cm).
Specifications:
Number of Drive Links: 78
Gauge: 0.05 inches (1.3mm)
How do I measure the length of my chain?
The length of your chain is determined by counting the number of drive links in your chain
Your drive link count has a direct correlation to your bar’s length
Be careful; a bar made by OREGON may take a different drive link count than that of another producer
Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it
Or, if you have an OREGON chain in an OREGON box, the drive link count is stamped on the flap; you can save that flap for future reference
The Models listed above are for guidance only
Please check with manufacturer Handbook to ensure suitable fit and installation instructions
Features:
- Micro-Chisel cutters have small-radius working corners that cut fast and are easy to sharpen.
- Vibe-Ban chassis design reduces vibration 25% or more at the handles.
- Bumper drive links reduce kickback.
- Lubrilink tie straps help keep oil where it is needed-on the chain.
- Lubriwell oil holes in bumper drive links help carry oil around the full length of the guide bar’s groove.
- Recommended for saws from 35 to 55cc for bars from 13 to 18 (33 to 45cm).
Specifications:
Number of Drive Links: 78
Gauge: 0.05 inches (1.3mm)
How do I measure the length of my chain?
The length of your chain is determined by counting the number of drive links in your chain
Your drive link count has a direct correlation to your bar’s length
Be careful; a bar made by OREGON may take a different drive link count than that of another producer
Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it
Or, if you have an OREGON chain in an OREGON box, the drive link count is stamped on the flap; you can save that flap for future reference
| Make | Model | Size (cm) | Size (inches) |
|---|---|---|---|
| Ryobi | ECE1841 | 51 | 20 |
| Ryobi | RCS4450 | 51 | 20 |
| Ryobi | PCN4040 | 51 | 20 |
| Ryobi | PCN4045 | 51 | 20 |
The Models listed above are for guidance only
Please check with manufacturer Handbook to ensure suitable fit and installation instructions
Specifications
More Help
If you require more information or assistance with this product please consult the links below :
There is a Oregon manufacturer warranty for this product which covers all manufacturing defects for the normal lifetime of the tool but does not cover wear and tear or damaged cause by misuse. This does not affect your statutory rights.