Black and Decker BDPR400 Paint Roller
FREE Click & Collect in store
See All Black and Decker Here
Accessories for this product
Read 4 Customer Review(s) for Black and Decker BDPR400 Paint Roller
Excellent product delivered on time! Painted my room with no mess in one day! Very happy!
Quality product, which serves its purpose
Bought this to replace dulux paint pod took me 3 hours to paint my lounge walls andcelling room size is 22 by 14 quick and easy to use easy to clean just watch the videos on YouTube before using really helpful
Tooled up were brilliant, this is not a review of them. However, this roller brush was not. It looked nice, felt light weight and seemed to have some good features but in reality it was none of things. The bit that sucks up the paint didn’t have a way of sticking to the side of the paint tin so kept moving about and getting me covered in paint, the trigger kept getting stuck and not pushing out paint, both of which I could have ignored as it rolled quite well ........ but then the after about maybe 30mins of painting the metal s bend that holds the roller brush bent while I was painting, I bent it back and then happened three or four times before it snapped off. Cheap rubbish, will never purchase black and decker painting equipment again if that’s the quality they produce.
Customer Questions & Answers
Q : item bdpr 400 and spare roller . Can this be delivered tomorrow . Thanks neil
A : Hi Neil, unfortunately it's now past cutoff for same day despatch so the earliest we'll be able to send it out the door is tomorrow
Q : Can this be used on artex ceilings? Thanks
A : Hi Miranda, the user manual says the BDPR400 is suitable for walls and ceilings but they make no mention of artex specifically. I'm not sure if you meant to ask whether it's safe to use on artex ceilings or whether it will give satisfactory results, but it may be worth checking with Black & Decker to see if they have any specific advice as I've not got any experience in trying this and wouldn't want to give you the wrong information! (artex should be treated with caution as it often contains asbestos but it also comes in a wide variety of textures and I'm sure some will be more difficult to paint than others)
Q : Are the rollers special to the device or can you use any standard roller sleeve?
A : Hi Mel, this tool is only designed to work with the Black & Decker roller covers listed in the "Accessories for this Product" section of our website (they have perforations in them which allow the paint to seep through to the outside of the roller)
Q : Hi, is this suitable for painting the exterior of a house if I used the textured roller attachment (walls are pretty smooth but not as smooth as an interior wall. Will it take masonary paint in the tube pipe as it would emulsion? Thanks
A : Hi Kate, Black & Decker say this tool is only suitable for painting interior walls so this wouldn't be a recommended application - as such I'm afraid I don't know whether it would actually work with masonry paint or not but they may be able to advise further if you contact their product support team.
Q : How easy is it to clean after use
A : The roller can be detached and rinsed off as you would with a standard paint roller but cleaning out the tube takes a bit more time - the recommended cleaning process is outlined in the user manual which is available to view in the downloads section at the bottom of the product page if you want to take a look
Q : Morning Can you tell me the packaging size please ? Thanks Derek
A : Hi Derek, the shipping dimensions we have on our system are 210mm x 94mm x 927mm, many thanks
Q : I see no reservoir attached to handle, how is it taking the paint in?
A : I can confirm that the paint reservoir is built into the shaft.
Q : Do you have to dilute the paint
A : I can confirm that this will work with standard emulsion paint without the need to dilute.
If you require more information or assistance with this product please consult the links below :
This product carries a full 2 year manufacturers warranty covering both faulty materials and faulty workmanship, it does not cover general wear and tear or damage, batteries, blades, bulbs and other consumables. In the unlikely event of a fault the item returned is subject to fair wear & tear and must not have been used beyond the scope of it's design.
Some manufacturers will offer a direct repair or replacement service (as applicable) which will often resolve your problem more quickly.
We will exchange or refund within the first 30 days if a manufacturers fault is found with this product. Thereafter a repair or exchange as appropriate will be offered.
After the first year any warranty claims should be resolved with the manufacturer directly. To claim the full warranty a registration form may need to be completed - please check the paperwork enclosed with this product when purchased.
Get help regarding Black and Decker BDPR400 Paint Roller
For any technical enquiries relating to this product it is best to call the manufacturer, Black and Decker, direct on 0330 808 0719.
For any other queries relating to ordering this item, stock availability, existing orders or returning faulty items etc please contact us at Tooled-Up at firstname.lastname@example.org or call on 020 8805 3535.