Bosch Professional Chucks
Loading...
End of content
Error - No more pages to load
Bosch Professional Chucks at Tooled-Up.com
Bosch Professional Chucks cover replacement drill chucks and FlexiClick-style attachments for corded drills, cordless drills, hammer drills and SDS Plus machines. Tooled-Up.com stocks keyless chucks for fast, tool-free bit changes, keyed chucks for maximum grip, and chuck attachments that turn a compatible Bosch tool into a different type of drill.
The selection runs from the Bosch 10mm Keyless Chuck, with a 1.0–10.0mm capacity and a 3/8" – 24 mount, to the 13mm and 16mm keyed chucks for larger bits. Hammer drill keyless chucks with a 1/2" 20 UNF thread and a 1.5–13mm or 2–13mm capacity suit most standard drills. Check the thread size and capacity on each product page before you order.
Key Features of Bosch Professional Chucks
- Keyless two-sleeve design: lets you clamp the bit with two hands and no chuck key, so bit changes are quick and there is no key to lose on site.
- Hammer drill keyless chucks: the 1.5–13mm and 2–13mm versions are made for percussion use. The 1.5mm lower limit also holds small bits for pilot holes.
- Chrome finish options: the 13mm Chrome hammer drill chucks have a distinctive finish that makes them easy to tell apart in a toolbox.
- Keyed 13mm and 16mm chucks: tightening with a key gives a positive grip on larger bits. This suits heavy drilling in timber and metal.
- SDS Plus adaptor chuck: the 13mm keyless chuck with SDS Plus adaptor lets you use round and hex shank bits in an SDS machine.
- FlexiClick attachments: these swap onto compatible Bosch FlexiClick drill/drivers. The GFA 12-H adds SDS Plus capability and the GFA 18-M is a metal chuck attachment. The GFA 18-WM angle chuck helps in tight spaces, and the GFA 12-E offset attachment suits awkward screwdriving.
Who Uses Bosch Professional Chucks?
- Electricians and sparkies: use keyless chucks for quick bit changes when drilling cable routes, and angle attachments for tight spots between joists.
- Plumbers and heating engineers: need dependable grip for pipe holes and bracket fixings, with FlexiClick attachments to reach awkward areas.
- Carpenters and joiners: use a keyless chuck for fast changes between drill bits and driver bits.
- Builders and maintenance teams: fit an SDS Plus adaptor or hammer drill chuck to cope with mixed masonry and general drilling.
- Metalworkers and fabricators: turn to keyed chucks and metal chuck attachments for harder materials.
- DIYers: can replace a worn chuck and get an older drill working properly again.
Popular Bosch Professional Chucks
Keyless Chucks
The Bosch 10mm Keyless Chuck suits lighter drills and general drilling, while the 13mm 1/2" 20 UNF versions cover larger bits. Choose the hammer drill models for percussion work. The Chrome 13mm hammer drill versions offer the same 1.5–13mm range in a different finish.
Keyed Chucks
The Bosch 13mm Keyed Chuck and 16mm Keyed Chuck are for jobs where you want the firmest hold on larger bits.
Adaptors and Attachments
The 13mm Keyless Chuck and SDS Plus Adaptor suits SDS machines. For FlexiClick systems, Bosch offers the GFA Drill Chuck Attachment, GFA 18-M Metal Chuck Attachment, GFA 12-H SDS Plus Chuck Attachment, GFA 18-WM Angle Chuck Attachment, GFA 12-E Offset Excenter Bit Attachment and GHA FC2 SDS Hammer Chuck FlexiClick Adapter. Browse them all at Tooled-Up.
Frequently Asked Questions
Should I choose a keyed or keyless Bosch chuck?
Keyless chucks are faster when you change bits often. Keyed chucks, such as the Bosch 13mm and 16mm models, are better when you want the firmest grip on larger bits.
Which thread size do I need?
Many Bosch chucks here use a 1/2" 20 UNF thread, while the 10mm Keyless Chuck uses a 3/8" – 24 mount. Check your drill's spindle thread and the product specification before buying.
Can I use a standard chuck in an SDS drill?
Yes, with the right adaptor. The Bosch 13mm Keyless Chuck and SDS Plus Adaptor lets you fit round and hex shank bits into an SDS Plus machine for general drilling.
Are the GFA attachments interchangeable with any drill?
No. The FlexiClick attachments are designed for compatible Bosch FlexiClick systems. Check whether you need the 12v or 18v version before ordering from Tooled-Up.com.