Bosch Professional Sabre & Reciprocating Saw Blades

Bosch Professional Sabre & Reciprocating Saw Blades at Tooled-Up.com

Bosch Professional Sabre & Reciprocating Saw Blades are built for fast, aggressive cutting with a reciprocating saw. Tooled-Up.com stocks blades for specific jobs, including thin and thick metal, tough wood, nail-embedded pallets, aerated concrete, demolition and multi-material cutting. Matching the blade to the material means quicker cuts, less wear and fewer wasted blades on site.

The EXPERT series covers most of these tasks. Examples include the EXPERT S1022EHM for thin tough metal, the EXPERT S1142KHM for thick tough wood and the EXPERT S1169XHM for demolition. There are also specialist options such as the EXPERT S1157CHM vehicle rescue blades.

For mixed workloads, Bosch Professional wood and metal blade sets bundle several blade types into one kit. Browse the full selection at Tooled-Up.com to compare blades by material, thickness and application.

Key Features of Bosch Professional Sabre & Reciprocating Saw Blades

• Material-specific design: Blades are named for the job they do, such as thin tough metal, medium-thick tough metal or hard nail pallet. You pick the blade that suits the material rather than relying on a general-purpose compromise.
• Tough-cutting EXPERT series: The EXPERT blades are made for demanding materials and heavy use. They suit work where standard blades would dull or break quickly, such as thick steel sections or nail-embedded timber.
• Multi-material blades: The EXPERT S1156XHM and S1159XHM can cut through a mix of materials in a single pass. This saves time on refurbishment and strip-out jobs where you meet wood, nails and metal in the same cut.
• Aerated concrete blades: The EXPERT S1141HM and S1241HM are made for cutting aerated concrete blocks. A dedicated blade is far more effective than forcing a wood or metal blade through the material.
• S-shank fitting: The sets are designed for use with any S-shank reciprocating saw, so the blades can be used across compatible saws on your van or site.
• Mixed-application sets: The 15 piece set, for example, includes S 918 AF and S 918 BF blades for steel pipes and metal profiles, plus S 617 K blades for clean cuts in wood. Each blade type comes in multiples, so you have spares for the job.

Who Uses Bosch Professional Sabre & Reciprocating Saw Blades?

• Demolition and strip-out contractors cutting through pallets, studwork, fixings and mixed materials
• Plumbers and heating engineers cutting steel pipework and metal profiles during removal and replacement
• Carpenters and joiners making fast rough cuts in thick timber
• Builders and bricklayers working with aerated concrete blocks
• Maintenance engineers and fabricators cutting thin and thick metal on site
• Rescue and recovery teams using blades made for vehicle rescue work
• DIY enthusiasts tackling renovations with a mixed wood and metal blade set

Popular Bosch Professional Sabre & Reciprocating Saw Blades

Metal Cutting Blades

The EXPERT S1022EHM is made for thin tough metal. For thicker sections, the EXPERT S1155CHC is designed for thick tough metal, while the EXPERT S1155HHC and S1155HHM suit medium-thick tough metal cutting.

Wood and Pallet Blades

The EXPERT S1142KHM is made for thick tough wood. The EXPERT S1123CHM is made for hard nail pallet cutting, which makes it useful for breaking down reclaimed or nail-embedded timber.

Multi-Material and Demolition Blades

The EXPERT S1156XHM and S1159XHM are multi-material blades for jobs that mix materials. The EXPERT S1169XHM is a demolition blade for rough, fast strip-out work.

Aerated Concrete and Rescue Blades

The EXPERT S1141HM and S1241HM are made for aerated concrete. The EXPERT S1157CHM is a specialist blade for vehicle rescue.

Blade Sets

The 6, 15 and 20 piece wood and metal sets suit tradespeople who want a mixed selection to hand. Shop Bosch Professional Sabre & Reciprocating Saw Blades at Tooled-Up.com to choose between single-purpose packs and mixed sets.

Safety and Compliance

Reciprocating saws are powerful, so follow HSE guidance and the instructions supplied with your saw and blades. Wear safety glasses, gloves and hearing protection. Secure the workpiece, and make sure the blade is fully seated in the chuck before starting.

Cutting aerated concrete and some demolition materials produces fine dust. Under COSHH, you should control exposure with suitable extraction and appropriate respiratory protection. Check for hidden services before cutting into walls, floors or vehicles. Replace damaged, bent or cracked blades straight away. Regular use of vibrating power tools also calls for sensible management of hand-arm vibration exposure.

Frequently Asked Questions

Which Bosch Professional blade should I use for cutting metal?

Choose by thickness. The EXPERT S1022EHM suits thin tough metal, while the EXPERT S1155CHC, S1155HHC and S1155HHM are intended for medium-thick to thick tough metal. For general pipework and profiles, the S 918 AF and S 918 BF blades in the wood and metal sets are suitable.

Can I use one blade for wood, nails and metal?

The EXPERT S1156XHM and S1159XHM multi-material blades are designed for this kind of mixed cutting. For the toughest nail-embedded timber or pallets, the EXPERT S1123CHM or the S1169XHM demolition blade may be a better choice.

Will these blades fit my reciprocating saw?

The wood and metal sets are designed for any S-shank reciprocating saw. Check the shank type on your saw and the product listing before ordering.

Are the wood and metal blade sets worth buying?

They suit tradespeople and DIYers who move between materials. The 15 piece set, for example, includes blades for steel pipes and metal profiles as well as clean wood cuts. Having several of each type on hand means fewer interruptions when a blade wears out.

How do I get the longest life from my blades?

Match the blade to the material, let the saw do the work rather than forcing it, and keep the shoe pressed firmly against the workpiece to limit vibration. Replace a blade as soon as it dulls, because a worn blade slows cutting and puts extra strain on the saw.