Bosch Professional Sanding Discs

Bosch Professional Sanding Discs at Tooled-Up.com

Bosch Professional Sanding Discs cover surface preparation and finishing on wood, paint, filler, plasterboard joint compound and metal. The selection includes hook-and-loop discs for random orbital sanders, fibre discs for angle grinders and net abrasive discs for dust-critical work. Sizes run from 115mm and 125mm through 150mm and 180mm, up to 225mm discs for drywall sanders.

Browse the Bosch Professional selection at Tooled-Up.com and you will find products built around specific jobs. The EXPERT C470 Best for Wood and Paint discs, the C430 Wood Sanding Disc, the EXPERT Blue Metal discs, the R44 Metal disc and the EXPERT M480 Net Abrasive discs each suit a different material and stage of work, so you can match the abrasive to the task rather than settle for a general-purpose disc.

The open-coated and net abrasive constructions help the discs resist clogging and keep dust moving away from the surface. That means more consistent cutting and fewer disc changes on a busy job.

Key Features of Bosch Professional Sanding Discs

• Open-coat abrasive surface: The C430 and C470 wood discs have space between the grits, so dust clears and the disc is less likely to load up on paint, varnish, filler and primer.
• Net abrasive construction (M480): The open mesh allows dust to pass straight through, which suits drywall and plaster work and helps the disc stay cleaner for longer. M480 discs come in 125mm, 150mm and 225mm sizes.
• Hook-and-loop backing: The EXPERT C470 random orbital discs in 125mm and 150mm attach and release quickly, so you can move through the grits without fuss.
• Metal-specific abrasives: The EXPERT Blue Metal discs (115mm and 125mm), the R44 Metal disc (180mm) and the EXPERT Fibre Sanding Disc for Metal are made for grinding and finishing metal, where heat and pressure are higher.
• Multiple diameters: Sizes from 115mm up to 225mm let you fit small angle sanders, random orbital sanders and long-reach drywall sanders.

Who Uses Bosch Professional Sanding Discs?

• Joiners and carpenters: Smoothing timber, veneer and solid surfaces, and removing old varnish.
• Decorators: Keying paintwork, feathering edges and sanding filler and primer between coats.
• Plasterers and drylining contractors: Sanding joint compound and finished walls with 225mm drywall and net abrasive discs.
• Metal fabricators and welders: Blending welds, removing rust and finishing steel with metal and fibre discs.
• Furniture restorers: Stripping and refining finishes on wooden pieces.
• Serious DIYers: Taking on bigger refurbishment projects and wanting reliable, long-lasting abrasives.

Popular Bosch Professional Sanding Discs

Wood and Paint Discs

The EXPERT C470 Hook and Loop Sandpaper for Random Orbital Sanders (125mm and 150mm), the C470 Wood Sanding Disc and the Red Wood Top Sanding Discs (150mm) are the go-to choices for timber and painted surfaces. The Bosch 125mm C430 and C470 Wood Sanding Discs suit work from initial keying through to fine finishing, and the 115mm C470 Best for Wood and Paint discs fit smaller sanders.

Metal Discs

The EXPERT 115mm and 125mm Blue Metal Sanding Discs, the EXPERT 180mm R44 Metal Sanding Disc and the EXPERT Fibre Sanding Disc for Metal handle grinding and finishing on metalwork.

Drywall and Net Abrasive Discs

The EXPERT C470 Dry Wall Sanding Discs (225mm) and the EXPERT M480 Net Abrasive Sanding Discs (125mm, 150mm and 225mm) are suited to walls, ceilings and fine surface work where dust control matters.

Safety and Compliance

Switch off and unplug the tool from the 240v supply before changing a disc. Check that the disc diameter and fitting suit your sander, and never exceed the maximum speed marked on the disc or the tool.

Sanding creates fine dust, so use a suitable extractor wherever possible and follow HSE and COSHH guidance on dust exposure. Wear safety glasses, hearing protection and a correctly rated dust mask. Inspect each disc before use and replace any that are cracked, worn or damaged. Store discs flat in a dry place away from heat.

Frequently Asked Questions

Which Bosch Professional sanding disc is best for wood and paint?

The EXPERT C470 Best for Wood and Paint range is designed for wood, veneer, paint, varnish, filler and primer. The open-coated surface helps limit clogging on these materials.

What are M480 net abrasive discs used for?

M480 discs have an open mesh structure that lets dust pass through the disc. They are well suited to drywall and fine surface sanding where dust extraction is important. The 225mm version is made for drywall sanders.

Can I use wood sanding discs on metal?

It is best not to. Use the EXPERT Blue Metal, R44 Metal or Fibre discs for metalwork, as they are made to cope with the heat and pressure of grinding.

How do I know which size disc I need?

Check your sander's specifications for the correct diameter. Bosch Professional Sanding Discs are available in 115mm, 125mm, 150mm, 180mm and 225mm sizes, and the fitting should match your tool.

Where can I buy Bosch Professional Sanding Discs?

Shop Bosch Professional Sanding Discs online from Tooled-Up, where you can compare wood, metal and net abrasive options by size and application.