Faithfull Taps & Dies

Faithfull Taps & Dies at Tooled-Up.com

Faithfull Taps & Dies cover the full threading workflow, from cutting internal threads in drilled holes to forming external threads on bar, bolts and studs. The range is split into taps, dies, die stocks, tap wrenches and complete tap and die sets, so you can buy a single replacement or kit out a workshop in one go.

Tooled-Up.com stocks Faithfull threading tools in metric and imperial thread forms, suiting everything from fine engineering work to general maintenance and repair. Taps are available for blind and through holes, while dies and die stocks handle external threads and the clean-up of damaged ones.

Browse the Faithfull selection to pair the right cutting tool with the right holder, whether that is a die stock for circular dies or a tap wrench for hand tapping.

Key Features of Faithfull Taps & Dies

• Hardened steel construction: Taps and dies are made from tool steel for the hardness needed to cut clean threads in mild steel, brass, aluminium and plastics, with enough toughness to resist chipping.
• Ground flutes: Precision-ground flutes on taps clear swarf efficiently, reducing friction and the risk of jamming or snapping in the hole.
• Adjustable split dies: Circular split dies let you fine-tune thread diameter, which helps when a thread must mate with an existing nut or component.
• Taper, second and plug taps: Progressive tap types give a gentle start in the hole and a full thread depth close to the bottom of blind holes.
• Dedicated holders: Die stocks and tap wrenches give even, controlled turning force, which keeps threads square and protects the tool.
• Sets in storage cases: Tap and die sets keep common sizes organised and easy to identify on site or in the workshop.

Who Uses Faithfull Taps & Dies?

• Motor mechanics repairing damaged threads in engine blocks, gearboxes and chassis parts
• Maintenance engineers servicing plant, machinery and production equipment
• Plumbers and heating engineers dealing with threaded fittings, valves and fixings
• Fabricators and welders adding threaded holes to frames, brackets and custom metalwork
• Agricultural engineers repairing farm machinery in the workshop or field
• Home workshop users and restorers working on classic vehicles, bikes and older machinery

Popular Faithfull Taps & Dies

Taps

Individual taps are ideal for replacing a worn or broken size, or for a specific pitch not found in a standard set.

Dies and Die Stocks

Dies cut or restore external threads on bolts, studs and rod. Pair them with a die stock to keep the die square to the work and apply even pressure.

Tap & Die Sets

Sets bring together commonly used sizes in one case, a practical choice for general repairs, maintenance and mixed workloads. Shop Faithfull Taps & Dies at Tooled-Up.com to compare the set contents against the threads you work with most.

Tap Wrenches

Tap wrenches give the control and feel needed to turn taps by hand, particularly in smaller sizes where over-tightening can cause breakage.

Frequently Asked Questions

What is the difference between taper, second and plug taps?

A taper tap has a long lead-in and is used to start the thread. A second tap has a shorter chamfer for continuing the cut, and a plug tap has the shortest chamfer for cutting close to the bottom of a blind hole. Through holes can often be completed with a taper tap alone.

How do I choose the right drill size before tapping?

For metric coarse threads, subtract the thread pitch from the nominal diameter. For example, an M8 x 1.25 thread needs a 6.75mm pilot hole. Check a tap drill chart for exact sizes, as a hole that is too small risks breaking the tap and one that is too large gives a weak thread.

Can I use taps and dies with cutting fluid?

Yes, and you should. Use a suitable cutting or tapping fluid on steel, and a lighter lubricant such as paraffin on aluminium. Back the tool off regularly to break the swarf and clear the flutes.

Should I tap by hand or with a drill?

Hand tapping with a tap wrench is the safest approach, as it gives better alignment and feel. Using a tap in a handheld power drill makes it easy to lose alignment and snap the tap.