Makita DX12 XGT Dust Extraction Attachment

The Makita DX12 is a dust extraction attachment designed specifically for use with the Makita HR003 40V XGT cordless SDS Plus rotary hammer drill, allowing contractors to capture drilling dust directly at the source.

Fitted with an interchangeable HEPA filter, the DX12 traps 99.9% of particulates 0.3 microns or larger — making it well suited to environments where silica dust and other fine particles pose a health risk on site. Because it captures dust at the point of work, there is no need to connect an external dust extractor, keeping the work area cleaner and the setup simple.

Compatible with drill bits up to 260mm in length, the DX12 is a practical addition for tradespeople drilling into masonry, concrete, or blockwork where dust control is a priority — whether on a commercial site or in an occupied building where dust management is essential.

Features and Benefits:
• Designed for the Makita HR003 40V XGT cordless SDS Plus rotary hammer drill
• HEPA filter traps 99.9% of particulates 0.3 microns or larger
• Interchangeable HEPA filter for easy maintenance
• Compatible with drill bits up to 260mm in length
• Captures dust at the work area without requiring an external extractor

Specifications:
Maximum compatible drill bit length: 260mm
Filter type: HEPA (interchangeable)
Filtration efficiency: 99.9% of particulates 0.3 microns or larger
Compatible tool: Makita HR003 40V XGT cordless SDS Plus rotary hammer drill