Sealey SM14 Bench Belt and Wheel Sander
FREE Click & Collect in store
See All Sealey Here
Read 7 Customer Review(s) for Sealey SM14 Bench Belt and Wheel Sander
The machine is well built although a little noisy.I have found that the disk is slightly dished so care must be exercised to enable straight edges to be achieved.Generally speaking i am well satisfied with the purchase.I am pleased that the drive force is an induction motor.
Good smooth running machine with plenty of power.
I previously left the review below one month after purchase. it has had limited use in the last two years but has become increasingly unfit for purpose. I have finally decided to scrap it and look elsewhere for a replacement. I regret not returning it originally and claiming a refund. I note that you still sell this machine despite other poor reviews. gerry beetles
I have previously reported the problems of build quality that i remedied as i found the problems including 1. Drive belt not fitted just loose in the housing. 2.Problem of removing circular sander disc to refit belt. 3 broken tap left in base fixing hole so base could not be fitted 4 front guide roller for sanding belt seized because of distorted roller housing. i seriously reccomend that you do not sell any more of these sealey sanders until build quality is assured.
Build quality and quality control of the product is not good
When i set it up i found the drive belt was not on the spindles so i had to remove my brand new circular sanding disk to reattach the belt. The belt insists on running 5mm off the edge. I just hope that it stays in place. If not i think i will have to dismantle the whole spindle to adjust the position of the cog. Saying all that the sander is working well. The belt despite all adjusting slowly moves across the spindle so you have to stop every now and then to readjust it again. I can live with that.
unit does not look like picture, it's blue and quality is not as good as picture suggests, and the adjuster knob for belt tracking is useless, as it was split and falls off
End of content
Error - No more pages to load
Customer Questions & Answers
There have been no questions asked about this product yet. If you have a question please click below :
If you require more information or assistance with this product please consult the links below :
This product carries a full 1 year manufacturers warranty covering both faulty materials and faulty workmanship, it does not cover general wear and tear or damage, batteries, blades, bulbs and other consumables. In the unlikely event of a fault the item returned is subject to fair wear & tear and must not have been used beyond the scope of it's design.
Some manufacturers will offer a direct repair or replacement service (as applicable) which will often resolve your problem more quickly.
We will exchange or refund within the first 30 days if a manufacturers fault is found with this product. Thereafter a repair or exchange as appropriate will be offered.
Get help regarding Sealey SM14 Bench Belt and Wheel Sander
For any technical enquiries relating to this product it is best to call the manufacturer, Sealey, direct on 01284757500.
For any other queries relating to ordering this item, stock availability, existing orders or returning faulty items etc please contact us at Tooled-Up at email@example.com or call on 020 8805 3535.