Steinel HL 2020 E DIY LCD Hot Air Heat Gun

A high maximum heat output of 630° makes the HL 2020 E ideal for shaping, desoldering printed circuit boards, welding plastics, drying filler, shrinking on cable sleeves, soldering pipes & any other job requiring high, accurately adjustable heat - as well as a powerful blower. The current working temperature and airflow rate is indicated on the LCD display which is easy to read at any light level. The tool immediately responds to heat build-up with a warning indication triangle shown on the display screen.

Compatible with the HL 2020 E & available separately are a fine-dust filter and the HL Scan attachment for accurately measuring the temperature at the workpiece. The HL 2020 E hot air professional is compatible with a wide variety of Steinel nozzles.

Features and Benefits
• LCD display
• Residual heat indicator for optimum protection
• Ergonomic joystick for controlled operation
• An impressive 2200 watts of power, adjustable from 80°C to 630°C in 10°C steps
• Airflow rate adjustable in three stages (150 / 150-300 / 300-500 l/min.)
• Easily replaceable mains power cord

Specifications
• Airflow control: 3-stage
• Temperature regulation – yes
• Motor - Brush Motor
• Max. airflow rate: 500 l / min
• Heating element: Ceramic
• Min. airflow rate: 150 l / min.
• Power consumption: 2200 W
• Min. frequency: 50 Hz
• Max Frequency - 60 Hz
• Min. temperature range: 80°C
• Max. temperature range: 630°C
• Weight: 0.9kg
• Dimensions (l x w x h): 253 x 85.5 x 200mm