Wera 20 Piece Kraftform Kompakt Micro ESD Screwdriver Set

The Wera 20 Piece Kraftform Kompakt Micro ESD Screwdriver Set is a precision bit-holding screwdriver set designed for delicate mechanical work where electrostatic discharge (ESD) protection is essential. Compliant with DIN EN 61340-5-1, the handle material carries an electrical surface resistance of = 10? Ohm, making it a dependable choice for work on sensitive electronic assemblies, PCBs, and static-sensitive components.

The set is built around the Kraftform Micro handle, which features a free-turning twist cap for rapid spinning without the need to reposition your fingers. A dedicated power zone with integrated soft zones allows for confident transfer of tightening and loosening torque, while the precision zone directly above the blade supports accurate angle adjustment during fine work.

Bit changes are quick and tool-free — push the bit in to lock it automatically, then slide the sleeve forward to release. The bit holder accepts 4 mm halfmoon drive bits (Wera series 9) and 4 mm HIOS drive bits (Wera series 21), and all included bits are suitable for both manual and power tool use. With 19 bits covering Phillips, TORX®, TORX PLUS®, TORX PLUS® tamper-resistant, Hex-Plus, and slotted profiles, this set is well suited to electronics servicing, precision engineering, and instrument repair.

Features and Benefits:
• ESD-safe handle with surface resistance = 10? Ohm, compliant with DIN EN 61340-5-1
• Kraftform Micro handle with twist cap and free-turning zone for rapid, comfortable spinning
• Power zone with soft zones for effective torque transfer during tightening and loosening
• Precision zone above the blade for accurate angle control on fine adjustment work
• Tool-free bit change — push to lock, slide sleeve to release
• Compatible with 4 mm halfmoon (series 9) and 4 mm HIOS drive (series 21) bits
• All bits suitable for manual and power tool operations
• 19 bits covering Phillips, TORX®, TORX PLUS®, TORX PLUS® tamper-resistant, Hex-Plus, and slotted profiles

Contents:
1x 1013 Kraftform Micro ESD Bitholding screwdriver: 97 mm
3x 851/9 C J PH bits, halfmoon: PH 00 x 44 x 1.8 mm, PH 0 x 44 x 1.8 mm, PH 1 x 44 x 3 mm
6x 867/9 C TORX® bits, halfmoon: TX 1 x 44 mm, TX 2 x 44 mm, TX 3 x 44 mm, TX 4 x 44 mm, TX 5 x 44 mm, TX 6 x 44 mm
4x 867/9 C IP TORX PLUS® bits: 1 IP x 44 mm, 2 IP x 44 mm, 3 IP x 44 mm, 4 IP x 44 mm
2x 840/9 C Hex-Plus bits: 1.5 x 44 mm, 2 x 44 mm
3x 800/9 C slotted bits: 0.23 x 1.5 x 44 mm, 0.40 x 2 x 44 mm, 0.50 x 3 x 44 mm
1x 867/9 IPR TORX PLUS® tamper-resistant bit: 1 IPR x 44 x 1.8 mm

Specifications:
Screwdriver length: 97 mm
Bit drive: 4 mm halfmoon (Wera series 9) / 4 mm HIOS (Wera series 21)
Bit length: 44 mm
Handle surface resistance: = 10? Ohm
ESD standard: DIN EN 61340-5-1
Total pieces: 20