Black and Decker BDCCS18 18v Cordless Circular Saw 140mm
FREE Click & Collect in store
See the full range here
See All Black and Decker Here
Accessories for this product
Black and Decker BDCCS18 18v Cordless Circular Saw 140mm
Battery AH Explained
The best way to describe battery amp hour is that this is effectively the size of your fuel tank, the more amp hours your battery has then the longer the battery will last between charges. More amp hours does not increase the power of a given tool.
Battery Voltage Explained
A tool with a higher voltage than another is a bit like choosing an engine in a car, the higher voltage will generally mean higher power & performance. As with cars though a bigger engine does not always translate to better performance so it is important to compare the specifications of tools at different voltages between different manufacturers.
Black & Decker 18v System
The Black & Decker 18v Li-ion System is a range of 18v tools where all 18v batteries of all ah ratings fit all tools, allowing you to buy just a few batteries but as many of the range of bare tools that you need without the expense of a new batteries and chargers each time.
Read 6 Customer Review(s) for Black and Decker BDCCS18 18v Cordless Circular Saw 140mm
Great value for money, easy to order, arrived quickly.
Need a better battery I think. Product is built well and very sturdy. Tooled up been great also speedy and on time delivery and great customer service. Would recommend
Works with the batteries I already had, could have done with coming with a finer blade for less tear out on my first few projects.
Superb service, great comunication, bought as a gift, excellent quality
Great product and cuts very well. Could do with a few batteries as it likes to drain them quickly
For the first two days of using it I was really happy with it, I had a few batteries from other B&D products and accessories. I thought it was a great small saw. On day 3 it did not want to start. After a few attempts it started, but was hardly turning the blade round at a very small speed. I have returned it. Having been desperate to finish the job I started, I purchased the same saw from a different retailer as Tooled-up did not have it in stock, thinking I must have been unlucky. Needless to say the replacement also broke after a few days. It was cutting fine at one point and did not start a moment later. My guess is the motor is not strong enough and gives up quickly. At the time of purchase the saw seemed to be cheap in comparison to its competitors which I thought was great but then probably the price reflects its quality, so all in all I am giving it one point for value for money. It is a great pity, I value my other Black and Decker products. I also ended up with a rip fence and a spare blade for wood cutting . BTW , 5 stars to Tooled-up for customer support, they were brilliant.
End of content
Error - No more pages to load
Customer Questions & Answers
Q : Interested in saw. The blade is 140 but what is the bore size. ??
A : Hi Eddie, having consulted the manual the BDCCS18 requires a blade with a bore of 12.7mm (the manual is available at the bottom of our product page which also provides some more specifications if you need any further info)
Q : Hi am interested in this saw but I would only need a 2.0 ah battery and the saw not the charger there’s no option for this to add to basket confused thanks
A : Hi Craig, we don't tend to offer cordless tools in kit options with batteries but no charger as it's not commonly requested. However you can of course add a 2ah battery on to your order (all compatible batteries and chargers are listed in the "accessories for this product" section on the product page) - note that at the time of writing we are completely out of stock on this model and we're still awaiting more information from Black & Decker on when it will be available to start shipping out again.
Q : Hi, I'd like to purchase this circular saw without the battery. Please can you advise when you expect them to be in stock? Many thanks.
A : Hi Josh, we did have some limited stock of these last month but they didn't hang around very long. We're still awaiting more info from Black & Decker but once they have provided an estimated arrival date we'll add the ETA on to the website. There should soon be an option on our website to request an email when stock becomes available again - this is in development currently, but we hope to make it a feature of the website in the near future.
Q : Good morning. I am interested in this cordless saw. Could you please advise an in- stock date for this item. Thank you
A : Hi Geoffrey, we have some of them in stock currently (the 1x 1.5ah kit) but if you wanted the bare tool or the 2x1.5ah kit we don't expect to be able to start shipping these out until the end of the month
Q : When is this item likely to be in stock again?
A : Hi Fayaz, unfortunately we haven't had confirmation from Black & Decker yet but once they have advised when they are ready to ship again this ETA will start to show on the website.
Q : Hi Thank you, just received my order. Opening the box I have just noticed there is no rip fence in the box? Is this the norm now? Regards Ron
A : Hi Ron, it's not necessarily the norm as many current circular saws are supplied with a rip fence, but this isn't listed as a standard accessory for the BDCCS18 so it appears Black & Decker don't ship it with one.
Q : Hi, How do I change the blade on the 18v cordless circular saw?
A : Essentially you have to use the included hex key to loosen the blade while depressing the spindle lock as shown in the first image on the product page. The manual is available as a download at the bottom of the page where you will find complete instructions. Make sure you remove the battery before attempting to change blades and bear in mind the bolt has a left hand thread so you have to turn it clockwise to loosen it.
Q : Hi Can you please help me out that ,which charger and battery for Black and Decker BDCCS18 18v Cordless Circular Saw 140mm? thank you j
A : Hi Joseph, you can choose to buy this machine with battery and charger by selecting which model you require from the drop down menu at the right. Alternatively you can see a complete selection of compatible batteries and chargers in the "Accessories for this Product" section on the right of the product page. The most important thing to bear in mind is that the higher the Ah rating of the battery, the longer you will be able to use the saw on a single charge - if you only have to make a few cuts a 1.5ah battery should see you through but if you're working on bigger jobs a 4ah battery will be ideal
Q : Is this item currently in stock?
A : Currently we have all variations of this tool in stock yes (with or without batteries)
Q : Is the unit Black & Decker BDCCS18N 140mm Circular Saw 18 Volt Bare Unit brush less as this is not mentioned
A : This machine has a brushed motor
If you require more information or assistance with this product please consult the links below :
This product carries a full 2 year manufacturers warranty covering both faulty materials and faulty workmanship, it does not cover general wear and tear or damage, batteries, blades, bulbs and other consumables. In the unlikely event of a fault the item returned is subject to fair wear & tear and must not have been used beyond the scope of it's design.
Some manufacturers will offer a direct repair or replacement service (as applicable) which will often resolve your problem more quickly.
We will exchange or refund within the first 30 days if a manufacturers fault is found with this product. Thereafter a repair or exchange as appropriate will be offered.
After the first year any warranty claims should be resolved with the manufacturer directly. To claim the full warranty a registration form may need to be completed - please check the paperwork enclosed with this product when purchased.
Get help regarding Black and Decker BDCCS18 18v Cordless Circular Saw 140mm
For any technical enquiries relating to this product it is best to call the manufacturer, Black and Decker, direct on 0330 808 0719.
For any other queries relating to ordering this item, stock availability, existing orders or returning faulty items etc please contact us at Tooled-Up at firstname.lastname@example.org or call on 020 8805 3535.