Draper MM100 Damp and Moisture Meter
FREE Click & Collect in store
See All Draper Here
Customer Questions & Answers
Q : reading on plaster setting is 0.5 max thru out room what does this mean as 16% damp value is ok for normal house according to surveyers
A : Assuming the tool is giving an accurate readout this would imply up to 0.5% moisture content, though when it comes to attributing meaning to this result your surveyor will know a lot more than me! I will say that if you suspect this may not be accurate I would strongly advise getting a second opinion as the types of damp meters typically available in this price bracket are by no means infallible in my experience.
Q : What percentage does concrete have to be to be able to paint? My meter is reading OL?
A : This may vary according to the product you are applying to it (for example some primers are specifically designed for damp concrete) but unfortunately a reading of OL makes it impossible to ascertain exactly how damp the wall is as it is outside the measurement range
Q : The meter is saying ol in brick concrete mode does this mean there is damp in wall.
A : Hi Ian, the manual is a bit ambiguous as it says a reading of OL means "Out of range for this meter" - so whether this means the reading is outside its scope of measurement, or it can't read anything at all, I wouldn't like to say (although it looks like we were previously advised the former) - I would advise calling Draper's customer service department if possible? on 02380494344
Q : What does the reading OL signify?
A : I can confirm that if you are receiving a reading of OL, then the reading is over the limits that the detector can detect. (Over 40% moisture reading in wood and over 2.0% in material)
If you require more information or assistance with this product please consult the links below :
This product carries a full 1 year manufacturers warranty covering both faulty materials and faulty workmanship, it does not cover general wear and tear or damage, batteries, blades, bulbs and other consumables. In the unlikely event of a fault the item returned is subject to fair wear & tear and must not have been used beyond the scope of it's design.
Some manufacturers will offer a direct repair or replacement service (as applicable) which will often resolve your problem more quickly.
We will exchange or refund within the first 30 days if a manufacturers fault is found with this product. Thereafter a repair or exchange as appropriate will be offered.
Get help regarding Draper MM100 Damp and Moisture Meter
For any technical enquiries relating to this product it is best to call the manufacturer, Draper, direct on 023 8026 6355.
For any other queries relating to ordering this item, stock availability, existing orders or returning faulty items etc please contact us at Tooled-Up at firstname.lastname@example.org or call on 020 8805 3535.